73 messages,
Last post on May 20, 2012 at 1:07 PM
You are in the
Dodge Ram-2010 and older Forum.
What is this discussion about?
Dodge RAM 150, Dodge Ram Pickup 2500, Dodge Ram Pickup 1500 SRT-10, Electrical, Truck
May 24, 2010 (1:45 pm)
I have a 01 ram 1500 4x4 with 155588 miles on it the trans just started leakeing I think it,s the seal what do you think
#65 of 73 2003 1500 Ram cutting out on start
by tbully2010
Jul 18, 2010 (9:34 am)
We have a 2003 Dodge Ram 1500, 4.7 4x4...Truck has been cutting out on start, almost as though it is starved for fuel, cleans out after a few seconds and then will go. The transmission light came on several months ago, but diagnostics shows nothing wrong. This is happening more often now...truck is fine after several sconds of rough idling and attempts to get going...Any thoughts....could this be a idle control spring or is it a fuel filter problem?
Jul 19, 2011 (5:51 pm)
I have a 2004 with a similar problem The truck ran for about a mile or so then just gave out as well. it starts but does not turn over like a fuel problem
#67 of 73 p1687 code
by mesum71
Aug 12, 2011 (12:06 pm)
I have a 2002 dodge ram 1500 4.7 4x4 the parking lights stoped working thought it was the headlight switch replaced that this was not the problem,checked for code and got p1687 no mechanical instrument cluster bus message.blinkers and all other lights work,no blown fuses no power to the fuses in the fuse block for those lights
#68 of 73 HELP 89 DODGE D150 NO POWER
by nelson17315
Aug 13, 2011 (6:46 pm)
OK MY HUSBAND PUTS KEY INTO IGNITION AND TURNS IT OVER AND NOTHING!!! He has replaced the distrubtor cap, coil pickup, spark plugs, and rotor button. We also checked the battery and it's fully charged...What is wrong and please help!!!!!!!!!!!!!!!!
#69 of 73 Re: Dodge Ram General Operating Questions [arjay2]
by interstate30
Sep 13, 2011 (1:02 pm)
I had exactly the same thing happen yesterday -- same model/ same year truck as yours. Did you get any helpful responses? I'd sure be interested to know.
#70 of 73 Carburetor Question 85 Dodge Ram 150 Truck
by thea67
Feb 05, 2012 (10:02 am)
I am having some carb trouble with my old 85 Dodge Ram. I think the carb would work just fine if the parts for the fast idle were not missing. I have purchased for Ebay and older carb. I had intended to put the Ebay carb on my truck after I had rebuilt it, but the air/fuel adjuster screws were stuck and when I tried - as carefully as possible - to remove the screws, one of them sheered off. I soaked the base plate in P.B. Penetrating fluid before trying, but that didn't help.
Anyway, my question is: Does anyone know if I could use the fast idle parts from the Ebay carb on the existing carb? If so, then I'll just get a rebuild kit for the existing carb and go with that. I really wanted to use the Ebayr carb though, because of the air/fuel adjusters. I'd appreciate any help I can get on this.
Just one more thing. On the existing carb, the stepper cam in there. It's the linkage and the screw that is missing.
Sincerely,
Thea
#71 of 73 Question about wheels 85 Dodge Ram Truck
by thea67
May 11, 2012 (6:46 am)
I have a 1985 Dodge Ram D-150 and I wanted to ask, does anyone know how to do wheel conversions? I would like to up grade my wheels from 15" to 16" rims, but I don't want the speedometer to be off. My tires are P235/75R15 and I know if I put 16" rims I'll have to go with a lower profile tire, but the question is, how low would I need to go in order to compensate for the 75R15? If anyone could be of help on this it would be greatly appreciated.
Thea
#72 of 73 Re: Question about wheels 85 Dodge Ram Truck [thea67]
by kcram HOST
May 11, 2012 (4:09 pm)
225/75R16, 235/70R16, 255/65R16, or 275/60R16 will all keep your speedometer and odometer in check.
kcram - Pickups/Wagons/Vans+Minivans Host
#73 of 73 95 Ram 1500- No nothing!!
by rdt68
May 20, 2012 (1:07 pm)
I have a 95 ram 1500... It began to have a slow crank on start-up, then after driving and shutting it off it would not start, not even turn over. Now, it won't even do anything... i think the start relay is making( hear it clicking) and i measured 12.3v at the starter. I don't have a clue, I'm hoping someone here does.