You are here: Forums Sedans Mazda 626 Mazda 626 Engine Questions

Mazda 626 Engine Questions

31 messages,  Last post on Nov 17, 2009 at 7:47 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda 626, Sedan

Messages Page 2 of 4 1 2 3 4 Prev Next Last

Go To Msg # Search This Discussion

#8 of 31 Engine upgrade by fsami Feb 05, 2008 (10:02 pm)
Dear team,   kindly advise me on upgrading to which japanese engine for my 1982 626 sedan. i have SOHC 2.0 litre 80bhp engine in the car and i want to upgrade to almost twice the bhp's. i want to jump to 2.8 or 3.0 litre, is the chassis that capable of handling such power or not.
#9 of 31 Re: 626 LX V6 [mlsb] by miami626 Feb 17, 2008 (12:00 pm)
Replying to: mlsb (Dec 22, 2007 5:00 pm) I have a 2000 626 lx and yesterday my O/D off light just came on... my car won't go to 4th gear and my O/D button won't come on.. I have just been going around on websites to find out if this is the common problem with these cars and it sounds like it is. I have 101,600 miles on my car and I bought it at 53,000 where I have had to fix many parts of it already... i think it's time for a new car.. what do you think?
#10 of 31 O/D off light.... by miami626 Feb 17, 2008 (12:01 pm)
Does anyone know the average price for an overdrive replacement is?
#11 of 31 Re:Warped brake rotors by roundscomplete Mar 09, 2008 (6:34 am)
Replying to: hhrprobs (May 28, 2007 4:47 am) Brakeplanet.com Vented and Cross drilled set of rotors will cost About $50 ea. Last set of rotors you will ever need.
#12 of 31 Re: Ticking in or by the valves [fordlover100] by jkenenski Mar 23, 2008 (8:40 pm)
Replying to: fordlover100 (May 29, 2007 4:18 pm) hi i have a 97 626 and i also had a valve tap, i bought a service manual for it and it states that this sound is normal and also that it has hydraulic valve lifters so you cannot adjust them. i just let it go and it went away in about a month... Replies to this message: roundscomplete (Mar 28, 2008 3:10 am) roundscomplete (Mar 28, 2008 3:18 am)
#13 of 31 99 mazda 626 overheated and wont start by sharkpimp Mar 24, 2008 (2:38 pm)
I have a 99 mazda 626 4 cylinder it overheated on the express way and shut off now it wont start. had to have it towed back home, i fixed the leak it had, one of the small radiator hoses behind the exhaust manifold was cracked,I also replaced the spark plugs but still wont start, it cranks but will not start. I charged the battery and still it cranks but will not start. I took off the valve cover just to see the timing belt and it looks good its even tight so Can anyone help me with this problem? Replies to this message: roman9vs10 (Jul 27, 2008 7:21 pm)
#14 of 31 Re: Ticking in or by the valves [jkenenski] by roundscomplete Mar 28, 2008 (3:10 am)
Replying to: jkenenski (Mar 23, 2008 8:40 pm) What do you know about replacing engines? The engine in your car is bulit mostly of Aluminum. It hates HEAT.
#15 of 31 Re: Ticking in or by the valves [jkenenski] by roundscomplete Mar 28, 2008 (3:18 am)
Replying to: jkenenski (Mar 23, 2008 8:40 pm) Octane. Valve chatter is burning fuel trying to to provide power. Boost your Octane. The valves have shims that could be worn. Checking this tolerance for worn shims is a royal pain. Good Luck.
#16 of 31 engine by mazda98 Jul 01, 2008 (6:37 am)
i have a 98 626 when the car is in park it has a bad mis changed plugs,wires,changed what looks like the coil runs fine under driving conditions its just when its sitting it runs bad.
#17 of 31 2002 Mazda 626 Engine warning light by rezans Jul 11, 2008 (2:18 pm)
My engine warning light just showed up for the first time on my 2002 Mazda 626. I have 68000 miles on it. Does anyone know what this light indicates? I looked at my owner's manual and it states it could be low fuel which I know my tank is full. or the gas cap is loose which it is not or there is something wrong with the engine and should be taken to the nearest dealership for service. But before I do so, I want to hear advice from other owners out there. Your help is most appreciate. Thank you! Replies to this message: sylviabob (Jul 30, 2008 6:22 pm) rezans (Jul 30, 2008 8:35 pm)

Messages Page 2 of 4 1 2 3 4 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda 626 Mazda 626 Engine Questions