Mazda 626 Engine Questions

31 messages, Last post on Nov 17, 2009 at 7:47 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda 626, Sedan

#28 of 31 Re: Crank Pulley Replacement [deemarc2] by askperry Jul 28, 2009 (6:07 am)
Replying to: deemarc2 (Jul 20, 2009 3:57 pm) My crank pulley apart off three times. Each time, I got a replacement from the junk yard. It turns out that the AC compressor was locking up. I didn't know this until the third time it the pulley fell apart The compressor had locked up completely and wouldn't turn at all. After I replace the compressor I had no more problems with the Crank Pulley.
#29 of 31 check engine/ charge light by dre100 Aug 21, 2009 (11:02 am)
I have a 94 4cyl mazda 626 my check engine light is on and sometimes my car cuts off after displaying the charge light but it starts back up. I replaced the alternator and the spark plugs and it still shuts down when driving, and the check engine light cuts on and off, could anyone help me with this problem?
#30 of 31 Re: Crank Pully replacment [derwin1] by Tyler626 Nov 17, 2009 (7:39 pm)
Replying to: derwin1 (Oct 11, 2008 3:47 pm) an impact is probally your best bet it. a air impact and will be best seeing how it has more power than a battery powered one
#31 of 31 turbo help by Tyler626 Nov 17, 2009 (7:47 pm)
has anyone in here turbo a 95 626 i have the turbo intercooler piping and am getting the turbo headers soon anyone know how much boost i an push an stock internals??? any input will behelpful probally going to run seven to ten pounds if there is any no no about this let me know