You are here:
Forums
SUVs
GMC Jimmy
GMC Jimmy Climate Control Problems

82 messages, Last post on Oct 11, 2009 at 6:56 AM
You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester
| Is there a way to check the A/C Compressor Relay to see if it is any good? How do I check the connectors to make sure power is getting through to the components? I took my 95 Jimmy to the shop to get the A/C checked out, and they told me it still had 30%. But they wanted to charge me $85hr to troubleshoot the problem. I want to do everything I can myself before I take it in and pay the big bucks. | |
| Any problems with your A/C ... talk about it here. | |
Ok here is my problem. Its going to sound very strange. A/C works decently at night. blows around 60F. During the day im lucky to get 65F. The strange thing is, The higher the fan speed ... the hotter it blows. the lower the fan speed the cooler it blows. I checked the compressor levels, i have everything in the green on both high and low side. All my pipes going to and from compressor/accumulator are cold and sweating. Anybody have any ideas ? Could my A/C be sucking hot air from somewhere ? IM totally stumped. Any ideas are welcomed.
|
|
|
My '03 Trailblazer constantly reads inaccurate actual outside temperature. For example, here in Oklahoma we've had 30+ days of 100 degrees or higher, but my Trailblazer never reads more than 50 degrees. Consequently, my A/C sucks. What do I need to replace/check?
|
|
|
Replying to: rpducros2 (Aug 21, 2006 9:30 am) |
|
|
Replying to: jglong (Aug 27, 2006 12:23 pm) |
|
My 2000 Jimmy (97K miles) heat does not work. Only ambient temp air blows out. A/C works fine. Checked temps on all Radiator hoses and hoses going in and out through fire wall. Temps from 130 - 200 degrees. Thus, some heat should come out. Checked with vacuum gage that the all vent doors worked. No apparent problems. Pulled front dash off and can see the blender door motor pin rotates when the temperature adjuster is turned from hot to cold and back. No change in air temp though. The amount of air flow does decrease when changing temp knob from cold to hot. Thought is the blender door is stuck or broken. However, getting to the blender motor looks like a challenge. Any advice on what the problem may be and what to do next.
|
|
|
|
I have a problem with my Jimmy. When I turn on my ac the ac compressor turns on but there is no air coming out of the vents. Sometimes the air will blow for the first 3 minutes when I turn on the ac but it will always turn back off and I can still here the compressor on. Anybody heard of this before?
|
|
You are here:
Forums
SUVs
GMC Jimmy
GMC Jimmy Climate Control Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2001 GMC Jimmy



Browse by Board
Browse by Topic
Today's Chats