Last post on May 08, 2013 at 6:49 PM
You are in the Chrysler Sebring
What is this discussion about?
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#97 of 252 My Sebring Stalls
Apr 27, 2009 (11:41 am)
I have a 2000 Sebring JX Convertible. I've already dumped over ten grnad into the car. Now when stopping at stop signs or red light, the car sputters and likes to give out. I contacted Chrysler, and I was transferred to a call center in Mumbai, India. Finding an English speaking employee was harder than trying to get my car fixed. The dealer claims it can be a number of things, then admitted to the fact the the 2.4 liter engines in Chrysler cars have been known to cause problems. Nice to know now. Can anyone give some advice, on what my next step should be? The car runs great, as long as you don't stop.
#98 of 252 Re: 98 Chrysler Sebring Stalls on highway rpms drop and dies [nikolmann]
May 21, 2009 (1:03 pm)
have a new key made for it and programed:) good luck
sometimes the sibrings just stop recognizing the key.
#99 of 252 Re: Problem Starting 99 Sebring jxi conv [jmccafferty]
May 21, 2009 (2:33 pm)
have you tried programming a new key to your car. they have a bad habit of not recognizing keys.
#100 of 252 Re: My 1999 Crysler Sebring Conv. Wont start [skipford1]
May 21, 2009 (3:18 pm)
try programming a new key to your car and replacing the crank shaft position sensor. good luck let me know how it goes
#101 of 252 Chrysler Seabring problems. Please Help
Jun 18, 2009 (5:10 pm)
I have a 1998 Chrysler Sebring that was given to me and it drove fine for about 3 weeks then all of a sudden I was driving down the road and it didn't want to go and tried to stall out. I got it towed to a mechanic who took two days to tell me that it doesn't show up on the diagnostic and it needs a new computer. He wants to charge me $700. The car still starts it just tries to stall when you drive it. It is still at the mechanic but I have other people telling me that the car runs so the computer is fine. Can anyone give me some advice or know what would be wrong with it?
#102 of 252 Re: Chrysler Seabring problems. Please Help [jengary0325]
Jun 18, 2009 (7:24 pm)
I had a 1997 Sebring LXi with similar symptoms. Mechanic replaced the Exhaust Gas Recirculation E.G.R. Valve located directly behind the engine adjacent to the firewall. That corrected the problem and the repair cost about $150. Good luck.
#103 of 252 Re: Chrysler Seabring problems. Please Help [jengary0325]
Jun 19, 2009 (3:52 pm)
Sounds like the mechanic doesn't know what the problem is and wants you to throw some money his way. I suggest you take your car to another mechanic; even if you have to pay to have it towed. Good luck.
#104 of 252 sebring stalling out ans\d starting back no problem.
Jun 28, 2009 (5:35 pm)
I had a 98 sebring lxi ran great 80k miles. all of sudden at traffic jams or coming to lights it would stall.. sometimes start right back up sometimes take 20 minutes. So i started with new plug, wires, pvc valve, fuel filter, fuel pump, cap rotor and even new distributor. Something told me this aint right still doing the same thing. so i decided to gamble and go buy a cranshaft position censor 64.99 autozone. had a mechanic install after he insisted this would set off the engine light which wasnt going on. long stoy short he did it and its been fine since then..iff u are having this problem please start at the crank shaft position censor. will save u alot of time and money. which I had started here.. good luck and sometimes when the car is not setting off codes mechanics dont know what the problems are without just trying new things which cause u money
#105 of 252 sebring just stalling out!!!!!did everything but this
Jun 28, 2009 (5:45 pm)
My car 82,000 miles and all of a sudden at traffic jams or traffic lights it would die. I thought right away needs a tune up. so i installed new wires,plugs, distributor, cap, rotor, fuel filter, pvc valve, fuel pump,battery. bbom day later did the same thing. so i took a gamble went and bought a crankshaft position Censor. installed it and walla!!! car has been running fine. my compuiter was hooked up to 2 different computers to do a code reading and nothing was coming up..so they mechanics told me same thing they dont know what it was.. TRUST ME CHANGE CRANKSHAFT CENSOR
#106 of 252 Re: sebring just stalling out!!!!!did everything but this [chriscapo]
Jun 29, 2009 (9:16 am)
your gonna want to replace the map sensor on the manifold 1 min job.
and if that don't work id say do replace the speed control sensor on the trany also easy. just remove the front driver side tire and its located on top of the trany in plain sight. good luck and let me know how it goes.