Sign In Join 



Chrysler Sebring Starting and Stalling Problems

132 messages,  Last post on Nov 15, 2009 at 11:41 AM

You are in the Chrysler Sebring Forum. Your Host is claires

What is this discussion about? Chrysler Sebring


Messages Page 3 of 14
1
2
3
4
5
6
7
...
14
Prev
Next
Last
Go To Msg #
Search This Discussion

#17 of 132
89 sebring convertable by skeeter5
Apr 14, 2007 (3:48 pm)
Reply
my 98 sebring convt.will not start when it gets hot.i can wait a few minutes(45) and it will start.when the car is hot,i do not have spark.help please.
#18 of 132
2004 sebring with noise from front end by babydolls
Apr 30, 2007 (7:26 am)
Reply
I have a 2004 sebring sedan with a noise that sounds like an airplane propellor coming from under the hood. I took it to the shop and they could not identify. I am going bezerk with this noise. Can someone help!!!
#19 of 132
Sebring with code P 0340 cam sensor problem by babydolls
Apr 30, 2007 (7:28 am)
Reply
My sebring 04 had a code come up with this number on it. Does anyone know what it is ?
#20 of 132
2006 sebring by hhuang
May 01, 2007 (7:21 am)
Reply
I have the same issue on my 2006 sebring. The engine is 2.7L V6. The noise will last about 30 seconds. ???
#21 of 132
Re: 2006 sebring [hhuang] by babydolls
May 01, 2007 (8:40 am)
Reply

Replying to: hhuang (May 01, 2007 7:21 am)

Hhuang, my noise,which sounds like a airplane propellor last for the entire time that my car is in gear. I don't know any other way to describe it.
#22 of 132
2004 Sebring Convertible will not start by convertible1
May 01, 2007 (11:45 am)
Reply
I sent a post a couple of weeks ago stating that my new 2004 Convertible would start then immediately stop. The tow truck drive was able to start it and the Ford dealer technician was also able to strt the engine. Upon calling a Chrysler dealer I found that when using an all metal key the car would not stay started. The key with a rubber top has a computer chip in it which allows the engine to run. I had no idea that this theft device even existed.
Since then my wife and I love traveling in our Sebring Convertible and are proud to be a member of the Sebring Convertible club. Young and having a ball at 60
Richard
#23 of 132
Re: 2004 Sebring Convertible will not start [convertible1] by babydolls
May 02, 2007 (10:45 am)
Reply

Replying to: convertible1 (May 01, 2007 11:45 am)

My 2004 Sebring sedan is having trouble with the torque convertor, anyone else with problems ?
#24 of 132
Chrysler sebring with hub assembly problem by babydolls
May 03, 2007 (8:42 am)
Reply
Any chrysler owners with defective hub assemblies? I have 52k and it shouldn't be giving me problems this early!!
#25 of 132
2001 3.0L Coupe Engine ruff Idle by mgilmo1969
May 12, 2007 (6:04 pm)
Reply
My 01 coupe has a ruff idle kind of a buzz. all the belts were removed but its still there. Changed Plugs, wires, cap and rotor, injectors and intake gasket. still does it 60K miles, can feel it in the steering wheel.
#26 of 132
Re: Chrysler sebring with hub assembly problem [babydolls] by mgilmo1969
May 12, 2007 (6:07 pm)
Reply

Replying to: babydolls (May 03, 2007 8:42 am)

Yes changed right front at 51K the other needs it now atr 61K. Also bad lower ball joints and stabilizer links. You had many engine problems?

Messages Page 3 of 14
1
2
3
4
5
6
7
...
14
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement