- #149 of 159
-
Re: please help me!!!!.....need some smart people!!!! [koolsmoker28]
by mrpipes
-
Aug 18, 2009 (4:53 am)
-
|
|
Replying to: koolsmoker28 (Aug 07, 2009 5:40 pm)
it sounds like you blew out the fuse inside that little box on top of the battery . if that is ok then check your fuses in the passenger compartment when you open the passenger door.
|
- #150 of 159
-
Re: 2000 Venture-some days works, some days dies (not battery) [chelmarsie]
by chelmarsie
-
Aug 18, 2009 (7:56 am)
-
|
|
Replying to: chelmarsie (Jun 22, 2009 9:31 am)
just wanted to say we bought a new battery and have had no more problems with it stalling or not starting. But of course now we are having tons of other problems (mostly electrical) and also when I had to have a tire repaired, they found my air shocks are leaking (so now we have to get that repaired). I wish I could get rid of this van before it costs me a fortune, and get a newer reliable vehicle (Toyota would be my first choice! no more ventures!). I have heard many people have so many problems w/the venture after 4-5 years.
A few times now when I put it in drive it won't go...feels like it is struggling, like I am riding through tons of mud (or something is stuck under the wheel) but then it finally goes. Very weird problem.
|
- #151 of 159
-
Re: please help me!!!!.....need some smart people!!!! [mrpipes]
by koolsmoker28
-
Aug 19, 2009 (3:23 am)
-
|
|
Replying to: mrpipes (Aug 18, 2009 4:53 am)
i did check the fuses located on the battery(all seem ok)..but did not check them inside the vehicle....i keep being told either a bad ground(somewhere) or a hot wire grounding out(could be anywhere).. and thank you for the information i will check them tonight and will take any other ideas or advice if anyone has them!!!!!!!!!!!!!
|
- #152 of 159
-
Re: radio changes volume [jhd]
by bledford
-
Aug 19, 2009 (2:36 pm)
-
|
|
Replying to: jhd (Jul 12, 2009 4:09 am)
If it is the OEM radio your have an aout volume button on the lower right hand side of the radio. this is a feature that automaticly adjusts the volume to compinsate for road noise. if you dont like the feature hit the button (auto Volume) and it will stop.
|
- #153 of 159
-
97 Chevy Venture dash gauges not working
by jbartik
-
Aug 26, 2009 (4:07 am)
-
|
|
Our 97 Chevy Venture has all of the gauges on the dashboard stop working. We have had it fixed only to have it stop in a week and a half. This has happened 3 times. Does anyone have any suggestions?
|
- #154 of 159
-
Re: 97 Chevy Venture dash gauges not working [jbartik]
by rlp50
-
Aug 26, 2009 (6:57 am)
-
|
|
Replying to: jbartik (Aug 26, 2009 4:07 am)
I'd be curious to know what it is you had fixed the first time. I've had the same problem with my 2000 and never did find out what was causing the problem. It used to be internittent, now the lights are off permanently. As a bypass, I shunted a wire across the interior light switch in the ceiling console and now turn them on or off with that switch.
|
- #155 of 159
-
tail lights and liscense plate lights
by lb71
-
Oct 02, 2009 (3:24 pm)
-
|
|
I see Ventures have quite a bit a electrical problems. I am having similar problems with tail lights overheating the bulb sockets. What is the solution? though it didn't look like the license plate lights are over heating. I have a 2002 venture
|
- #156 of 159
-
Re: tail lights and liscense plate lights [lb71]
by rlp50
-
Oct 02, 2009 (4:25 pm)
-
|
|
Replying to: lb71 (Oct 02, 2009 3:24 pm)
Smoother the end of the bulb and socket with di-electric grease. That worked for me.
|
- #157 of 159
-
Re: tail lights and liscense plate lights [rlp50]
by lb71
-
Oct 04, 2009 (10:02 pm)
-
|
|
Replying to: rlp50 (Oct 02, 2009 4:25 pm)
thanks there I will try it out
|
- #158 of 159
-
Interior lights,door locks and windows inoperative!
by gayegill
-
Nov 24, 2009 (10:59 am)
-
|
I have a 2007 Venture Van. The problem is as stated in the title. Once I was told to disconnect the (positive) post for 1-5 mins to reset the computer. To my surprise it worked!!! Wait before you jump for joy. It only worked for about (2) on, off cycles of the ignition. It only worked that once and I've been frustrated since.
Is there anyone who has had this problem, and how did you resolve it?
|