Last post on Apr 29, 2010 at 12:11 AM
You are in the Toyota Highlander
What is this discussion about?
Toyota Highlander, SUV
#3 of 8 Glass Breakage Sensor
Oct 25, 2007 (4:55 am)
My principal reason for getting the RS3200 Plus option was it includes a glass breakage sensor. I have used the procedure in the Owner's Guide to test the sensor, but the alarm will not come on. I suspect the sensor (microphone), but can't locate it. Does anyone know where the sensor is located in the 2008 Highlander Limited?
#4 of 8 Re: Glass Breakage Sensor [vanyukoner]
Oct 25, 2007 (3:36 pm)
I'm not sure where the sensor is placed but it takes a pretty sharp hit on the glass to make the alarm trigger. I used a quarter and had to rap on the glass a few times for it to work.
#5 of 8 Re: Glass Breakage Sensor [ronl]
Nov 11, 2007 (10:15 pm)
Don't hit the glass with anything, you will likely break the glass before the sensor is triggered.
to test the glass breakage sensor, leave the window down and lock the car.
clap your hands once or twice just next to the open window, the alarm should trigger
#6 of 8 should be behind the glovebox
Mar 16, 2010 (9:04 am)
If you refer to the installation instructions here, you should see that the mic is to be installed behind the glovebox.
#7 of 8 correction
Mar 16, 2010 (11:25 am)
Actually, it is the "backside of the Glove Box Under Cover".
#8 of 8 Anyway to disable alarm chirp?
Apr 29, 2010 (12:11 am)
Hi all... I have a 2005 Highlander Limited and would like to disable the annoying chirp that sounds when activating/deactivating the alarm with the remote. Is this possible? I would also like to disable the beep that occurs every time I press a button for my stereo/navigation system. Many thanks in advance for any help.