You are here:
Forums
Vans & Minivans
Nissan Quest
Nissan Quest Door & Window Problems

17 messages, Last post on Oct 19, 2009 at 8:39 AM
You are in the Nissan Quest Forum. Your Host is Karens
|
Replying to: tjshan (Mar 08, 2007 10:35 pm) |
|
| I was backing up and the driver side door was left open. Next thing i knew, it caught on a fencepost and was bent backwards like it wasn't supposed to be. So now the door is bent on its hinges and it will not shut. My question is about the engine. For some reason when I bent the door the engine shut off, and now it will not start. The starter is working, so there is no battery problem, but the engine will not run. Could this have something to do with an "auto shut off mechanism" built into the car? If someone would offer advice on how i could get this thing started it wouldbe greatly appreciated. | |
Has anyone had a problem with their automatic doors rubbing causing the safety system to reverse the door. I have had this incident occur two seperate times....It appears on of the door brackets is rubbing on something as it closes. I put a little upward pressure on the the door step wherein the problem corrected. Please advise.
|
|
|
|
|
Replying to: ob1 (Aug 09, 2007 8:27 pm) |
|
Is anyone else having hard time finding parts for your Mercury villager? My Master door switch broke some time ago and I can't find one to save my life. I would prefer to buy a used part as the new ones are a little expensive.
|
|
|
Replying to: llindsey (Sep 01, 2007 2:56 pm) You could try an auto salvage yard if you can find on in your area - unless they have a whole door to sell, they may have pulled the switch out and have it sitting around for sale. I don't know of an internet parts source off-hand; sometimes they show up on eBay. Steve, visiting host |
|
You are here:
Forums
Vans & Minivans
Nissan Quest
Nissan Quest Door & Window Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Mercury Villager



Browse by Board
Browse by Topic