Last post on Jan 07, 2012 at 11:05 AM
You are in the Volkswagen Cabrio
What is this discussion about?
Volkswagen Cabrio, Convertible
#66 of 70 Is it safe to clean the Mass Airflow sensor for a 1999 Cabrio
Apr 06, 2011 (7:47 pm)
Is it really possible to clean the Mass Airflow Sensor on this vehicle. I heard rubbing alcohol works fine, as long as it dries up really good. Can anyone let me know if this is true? Thank You.
#67 of 70 1996 Cabrio-I'm stumped
Apr 19, 2011 (7:17 pm)
I recently purchased a 96 Cabrio, and I knew it had a few problems with it. However, after fixing a few of the problems, the car started idling extremely rough, and shuts off if you don't press the gas when stopped. I replaced the throttle body, as per the dealer suggested, and it still runs horribly. If you drive it like you are racing, it drives fine. However, if you try to be gentle, it bogs and shuts off after you shift right around and under 2700 RPM's. After that it drives fine. I even replaced the Mass Air Flow Sensor, and it didn't change the way it drove. Any ideas? Please help! Oh, plus the speedomotor doesn't work. I replaced the speed sensor, I believe the tranny one, but still no speedomotor.
#68 of 70 Re: More 02 Cabby Problems.. [57raggtop]
Nov 02, 2011 (1:08 pm)
Hello i'm having same prob did u fix it and how
#69 of 70 CLUSTER IS READING DRIVE WHILE IN PARK
Nov 02, 2011 (1:18 pm)
Have an 01 Cabby with only 114 k miles,picked up car cheap. Here is my Prob, Just got it on the road, only driven it 2 days parked to clean the inside in my driveway. When i go to crank it up to go to the store nothing happens, thinking the Bat was to low i jump it off but still nothing.. Come to find out the Indicator in the cluster is reading the trans in D (drive) while the shifter is in park..Can move the shifter from P to Manual 1 and the indicator does not move in the cluster just stays at D. Trying to find out if this is a trans Issue or a computer Issue?
If anyone has any info plz help..Thanks
#70 of 70 cabrio heater motor resistor
Jan 07, 2012 (11:05 am)
I am looking for the heater motor (fan) resistor location on my 99 cabrio. Fan positions 1,2,3 do not work only the high position 4.