You are here:
Forums
Sedans
BMW 3-Series
BMW 3-Series Service

38 messages, Last post on Oct 11, 2009 at 9:21 AM
You are in the BMW 3-Series Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: wynn3 (Sep 09, 2009 5:15 am) Do you mean the Oil Service or Inspection light? They told me that was normal?? Is that true? They are either idiots, fools, or liars- or possible even all three. The following procedure may, repeat may work, but I have not personally used it on an E90 3er: Step 1 Insert key into slot Step 2 Press start/stop button without depressing clutch/brake and wait for the service reminder to dissapear. Step 3 Immediately after service reminder goes out, press and hold the odometer reset. After 3 secs a warning triangle will appear, keep the odo. button pressed and after another 2-3 secs the Oil can will appear. I f you hold it too long (10 secs in total) you will overshoot the runway and some German writing will appear giving the software level/ can bus etc. of the car. Go back to the beginning and start again. Step 4 You are now in the service menu, use the toggle switch on indicator stalk to scroll up/down through the various service items. Step 5 When you have the item you want to reset showing, press the BC button on end of indicator stalk. Reset should now appear in the display. Press in and hold the BC button for 2-3 secs and a clock will start whirling around and hey presto, its done Step 6 You can now either scroll up/down to select another item (as in step 4) or you can press the start/stop button to exit. |
|
|
How would we find someone to repair a blower motor/rheostat in the Appleton WI area? We're not having much luck. The dealer wants to replace the entire unit at a cost of over $1,500. We've had this happen before and it was only a rheostate that was pretty cheap plus labor. Best, Dave |
|
You are here:
Forums
Sedans
BMW 3-Series
BMW 3-Series Service
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 BMW 3 Series



Browse by Board
Browse by Topic
Today's Chats