Sign In Join 



BMW 3-Series Service

38 messages,  Last post on Oct 11, 2009 at 9:21 AM

You are in the BMW 3-Series Forum. Your Hosts are pat & karens

What is this discussion about? BMW 3 Series, Sedan


Messages Page 5 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion

#35 of 38
BMW 325i 2006 Service Light by wynn3
Sep 09, 2009 (5:15 am)
Reply
I just bought a BMW 325i witn 60,000 miles, i went ahead and got the 60,000 service done but the service light is still on. They told me that was normal?? Is that true?? I am not sure what I should do. I bought an extended warranty should I take it in to get looked at?
 
Thank you for your help
#36 of 38
Re: BMW 325i 2006 Service Light [wynn3] by vickikech
Sep 09, 2009 (8:04 am)
Reply

Replying to: wynn3 (Sep 09, 2009 5:15 am)

That's lame. It's not normal. So long as there's nothing else the matter with the engine, the sensor's probably bad. Lots of sensors on mine had to be replaced. The window guvenors (sp?) are bad too, at least for the 2002 325i.
#37 of 38
Re: BMW 325i 2006 Service Light [wynn3] by roadburner
Sep 10, 2009 (6:04 pm)
Reply

Replying to: wynn3 (Sep 09, 2009 5:15 am)

I just bought a BMW 325i with 60,000 miles, i went ahead and got the 60,000 service done but the service light is still on.
 
Do you mean the Oil Service or Inspection light?
 
They told me that was normal?? Is that true?
 
They are either idiots, fools, or liars- or possible even all three.
 
The following procedure may, repeat may work, but I have not personally used it on an E90 3er:
 
Step 1
Insert key into slot
Step 2
Press start/stop button without depressing clutch/brake and wait for the service reminder to dissapear.
Step 3
Immediately after service reminder goes out, press and hold the odometer reset. After 3 secs a warning triangle will appear, keep the odo. button pressed and after another 2-3 secs the Oil can will appear. I f you hold it too long (10 secs in total) you will overshoot the runway and some German writing will appear giving the software level/ can bus etc. of the car. Go back to the beginning and start again.
Step 4
You are now in the service menu, use the toggle switch on indicator stalk to scroll up/down through the various service items.
Step 5
When you have the item you want to reset showing, press the BC button on end of indicator stalk. Reset should now appear in the display. Press in and hold the BC button for 2-3 secs and a clock will start whirling around and hey presto, its done
Step 6
You can now either scroll up/down to select another item (as in step 4) or you can press the start/stop button to exit.
#38 of 38
repair facility in Appleton WI area by dave266
Oct 11, 2009 (9:21 am)
Reply
How would we find someone to repair a blower motor/rheostat in the Appleton WI area? We're not having much luck. The dealer wants to replace the entire unit at a cost of over $1,500. We've had this happen before and it was only a rheostate that was pretty cheap plus labor.
 
Best,
 
Dave

Messages Page 5 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement