You are here: Forums Sedans Mazda 626 Mazda 626 Transmission Questions

Mazda 626 Transmission Questions

44 messages,  Last post on Nov 03, 2009 at 1:33 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#40 of 44 Turn signal slow to start by ronper Jun 01, 2009 (7:16 pm)
I have a Mazda 626 1993 model 4cyl Auto transmission car.   Since of late, when I want to indicate to turn left or right, it takes a few minutes before it starts to flash. On hot days it flashes OK.   I also find that when the hazard warning is switched on, the indicatoir lights flash normally. Any ideas about this problem?
#41 of 44 Re: trans range switch [alanbiogen] by dante007 Jul 23, 2009 (8:46 pm)
Replying to: alanbiogen (Nov 12, 2008 5:06 pm) hello, i also have the same problem (2000 626 LX). my mazda will shift around 5000 rpms? can i replace the transmission fluid myself? How do i do this? Can anybody give me step by step procedures? I would like to know where is the speed sensor located? have you heard of the transmission fluid type M3? i was told that this needs to be used instead of the regular ATF?   Please help, I AM DESPERATE AS WELL! e mail me dante_merinolive.com with your responses.   Thank you
#42 of 44 Start mixed with auto transmission by jiovany Aug 13, 2009 (4:47 pm)
A few months ago I spent a fortune changing the transmission on my Mazda 626 model 97,I dont really use a lot this car , a few months ago suddenly the car didn't start , so a friend put a wire between the battery and the starter, and the engine turn on like regular , but regardless if you put on P,N,R or D the car only runs on D , and since then this is the only way to turn on and run the car I'm almost sure that is something simple but i dont want to take the risk to pay another fortune, can you help me on getting an idea about what could be possible wrong?   Thanks and please address your answer to Jiovanybulnesyahoo.com
#43 of 44 Re: 97 626 transmission problem [kfpfla] by tazd23 Sep 01, 2009 (7:21 pm)
Replying to: kfpfla (Sep 12, 2008 8:24 am) I have a 2001 mazda 626 and have the trans. cooler on it already and it works great but i just recently put a trans tune product in form autozone and my overdrive light started flashing but it sifts and runs normal. what should i do?
#44 of 44 Re: [alanbiogen] Did u ever get your engine light off? [mlbscouting] by bt100 Nov 03, 2009 (1:33 pm)
Replying to: mlbscouting (Jan 23, 2009 6:48 am) I Own a 1998 Mazda 626 lx V6 automatic, I just purchased it 3 months ago in what I thought was great shape.. It has now began to have many different issues. First the check engine light stays on, then the RPM starts to go higher than before going up to 2500-3000 before switching. It felt like it was just delayed a few seconds more then normal. I then took it to mazda and they said the diagnostic was "PO400, EGR system flow malfuntion which may be plugged or open "was causing the engine light to stay on and that I need a new transmission to fix the gear switching issue. Now the brake light has started to come on when I stop, but the brakes are fine. Then I went to start it today and it felt like the starter was toast, (wasn't doing anything).........I tried it a few more times then it worked.....clearly alot of issues....can they all be related to the EGR valve? I really can't think about getting a transmission, and am needing some help with winter coming!!! Anyone???

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda 626 Mazda 626 Transmission Questions