You are here: Forums Sedans Mazda 626 Mazda 626 Transmission Questions

Mazda 626 Transmission Questions

44 messages,  Last post on Nov 03, 2009 at 1:33 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#27 of 44 Re: mazda 626 - plz help [5ddjjh] by mkmvette Sep 24, 2008 (7:16 am)
Replying to: 5ddjjh (Sep 24, 2008 6:50 am) Thank you!
#28 of 44 Re: mazda 626 - plz help [5ddjjh] by boat8 Oct 24, 2008 (9:43 am)
Replying to: 5ddjjh (Sep 24, 2008 6:50 am) I have the same problem,,,would you please tell me what the outcome was,,and the cost ? Replies to this message: 5ddjjh (Oct 24, 2008 10:26 am)
#29 of 44 99 mazda 626 tranmission filter by boat8 Oct 24, 2008 (9:45 am)
Where is the filter located,,,and can a home repair mechanic replace it easily ?
#30 of 44 Re: mazda 626 - plz help [boat8] by 5ddjjh Oct 24, 2008 (10:26 am)
Replying to: boat8 (Oct 24, 2008 9:43 am) Let me make sure that I understand. You have a Mazda 626 with the problem of the transmission not shifting into gear? And is due to the shift cable coming off at the transmission shift lever, found under the hood located on the left side near the fire wall? If so, the problem is the same as I encountered. Initially to make mine work, I took ahold of the end of the shift cable and spun it 180 degrees, which caused it to lay tightly against the shift lever on the transmission. At that point there was nothing holding it securely other than the force of being rotated. I then took it to my local Transmission shop and he figured out some sort of retainer(that he made up himself) and unrotated my cable and reattached it to the transmission shift lever, all for no cost. Even if you needed to pay to have this done, any local, decent repair shop should be able to make a repair for a minimal amount, say 40.00 or less. I have said a lot, and hope somehow this helps.
#31 of 44 by cgarcia1 Nov 10, 2008 (2:34 pm)
Thank you so much for that info 5ddjjh! I am going to get that fixed today! I have to tow it to the shop so I guess there goes 50bucks already! Hopefully I dont get ripped off!!! ouch!
#32 of 44 Re: trans range switch [bkristeller] by alanbiogen Nov 12, 2008 (5:06 pm)
Replying to: bkristeller (May 08, 2008 9:15 am) I have a 2000 626 4 cyl auto transmission as well. I am having the exact same problem. I replaced the transmission, the O2 sensors, the Max Air Flow sensor, installed a TransGo shift kit, installed a Hayden heavy duty transmission cooler, replaced the speed sensor, had the computer flashed to update the code, replaced both CV joint transaxles and it still has the same problem as the one you are describing. I just ordered a used PCM (computer) and a throttle position sensor.   Other than a manual lever position sensor (transmisson gear sensor) I don't know what else there is to do.   What is a transmission range switch?   Did you ever solve your problem? If so, how?   I am desperate. Please email me at alan at alancox dot name.   Thanks. Replies to this message: mlbscouting (Jan 23, 2009 6:48 am) backy (Jan 23, 2009 10:03 am) bt100 (Nov 03, 2009 1:33 pm) dante007 (Jul 23, 2009 8:46 pm)
#33 of 44 98 626 shifting problem by orionfe Dec 09, 2008 (2:59 pm)
1998 626 LX, V-6 that shifts fine through first and second but then doesn't go to third. It's like you knocked into neutral. Internal or something else?
#34 of 44 2000 626 transmission by bass_box Dec 12, 2008 (5:43 pm)
Replying to: kfpfla (Sep 12, 2008 8:24 am) i have a mazda 626 es 2000 i drove it to my friends house 1300 miles away from were i lived and the trans. messed up and i ended up drivein 600+ miles on it in 3rd or atleast 400 miles like that till it started to shift agian.... im in middle of replaceing trans.. and my problem is the torch converter dosent line up right... what could be wrong... is it keyed? to were it only lines up a sertian way..need to know befor i return it and try and rebuild my trans.. cuz i dont know how to realy repair it jest how to change parts out...
#35 of 44 Re: 626 slipping [alexmbj] by raphao Jan 03, 2009 (3:03 pm)
Replying to: alexmbj (Nov 27, 2007 1:10 pm) Hi i have the same problem, did you found what was wrong>???   pls replie at, raphaohotmail.com
#36 of 44 [alanbiogen] Did u ever get your engine light off? by mlbscouting Jan 23, 2009 (6:48 am)
Replying to: alanbiogen (Nov 12, 2008 5:06 pm) My 2000 Mazda 626 engine light was on and the gears began to shift differently(slight slipping). I took it to AutoZone for a diagnosis and it came up with the code P0715(Turbine shaft speed sensor). I purchased a sensor and had it installed by a local mechanic. The car then drove perfectly fine. The next day, the engine light was back on as soon as I pulled out of the driveway. The gears also began to slip again. I then took the car to Mazda and they diagnosed the same exact code, but suggested that I may need a new transmission. Is it possible that the sensor that was replaced could have malfunctioned, since it did not come from Mazda? If I put in a sensor from Mazda, will that be the trick? It drove perfectly fine the day that it was replaced. Is there a way to turn out the annoying engine light? Replies to this message: backy (Jan 23, 2009 10:03 am) bt100 (Nov 03, 2009 1:33 pm)

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda 626 Mazda 626 Transmission Questions