Pontiac Aztek Blower Motor and Resistor

15 messages, Last post on Dec 04, 2007 at 5:48 AM

You are in the Pontiac Aztek Forum. Your Hosts are steve_ & tidester

What is this discussion about? Pontiac Aztek, Heating / Cooling, Electrical, SUV

Outline

Messages Page 3 of 3: 1; 2; 3; Prev; Next; Last

#14 of 15 Re: 02' Pontaic Aztek [ray80] by conkycan Dec 03, 2007 (4:33 pm)
Replying to: ray80 (Nov 30, 2007 8:14 am) For some reason I am not getting power to the control head due you know if this is fed independently or if it is fed thru the resistor..If i jump the red wire in the resistor plug to the orange wire in the resistor plug everything works ( is the orange wire the power from or to the control head???) Replies to this message: ray80 (Dec 04, 2007 5:48 am)
#15 of 15 Re: 02' Pontaic Aztek [conkycan] by ray80 Dec 04, 2007 (5:48 am)
Replying to: conkycan (Dec 03, 2007 4:33 pm) I don't know as I haven't had to mess with this myself. I do know of another owner that had similar troubles and found loose wires in splice pack which they corrected and sovled problem. (exactly where that is I don't know either )

#14 of 15: Re: 02' Pontaic Aztek [ray80] by conkycan; Dec 03, 2007 (4:33 pm)

Replying to: ray80 (Nov 30, 2007 8:14 am)

For some reason I am not getting power to the control head due you know if this is fed independently or if it is fed thru the resistor..If i jump the red wire in the resistor plug to the orange wire in the resistor plug everything works ( is the orange wire the power from or to the control head???)

ray80 (Dec 04, 2007 5:48 am)

#15 of 15: Re: 02' Pontaic Aztek [conkycan] by ray80; Dec 04, 2007 (5:48 am)

Replying to: conkycan (Dec 03, 2007 4:33 pm)

I don't know as I haven't had to mess with this myself. I do know of another owner that had similar troubles and found loose wires in splice pack which they corrected and sovled problem. (exactly where that is I don't know either