Last post on Oct 30, 2012 at 7:20 AM
You are in the Honda Accord Coupe
What is this discussion about?
Honda Accord, Engine, Transmission, Coupe
#20 of 26 it is the main relay
Dec 24, 2009 (10:27 pm)
found a link that may help main relay
#21 of 26 1995 honda accord getting to much fuel
Dec 29, 2009 (2:47 pm)
my honda accord is flooding my plugs why?
#22 of 26 Re: 2000 Accord Coupe Not Starting [riggo]
Dec 31, 2009 (6:41 am)
Riggo, yes, this problem was resolved. My mech was not able to find any problems either. After reading some posts here on Edmunds, I suggested the Fuel Relay, which he agreed to try. It was replaced at a cost of about $95 and I have not had the problem since!!!! It's a small switch relay separate from the others, and I believe it's under the steering column.
#23 of 26 Re: 1994 Honda Accord Coupe stalling [davygoska]
Apr 07, 2010 (6:57 pm)
Did you ever find the solution, I am having the exact same problem.
Thanks for any help
#24 of 26 Re: 1994 Honda Accord Coupe stalling [italianbuty]
Apr 07, 2010 (7:13 pm)
Never did. Gave up. Was told it had to be something with the fuel pump or tank. If you find out anything, please let me know.
#25 of 26 Honda Stalling Fix
Jun 22, 2010 (5:43 am)
My 2001 Accord Coupe (170K) has been stalling for over year. There was never any indicators why it would do this but it finally didn't start back up and that's when they found the MAIN RELAY was down. They said it didn't show up on the computer before because it would only shut off for a minute when the car dies then come back on. Easy self fix for $40-50 at NAPA. This drove me crazy so I hope this help everyone.
#26 of 26 2006 HONDA CR-V
Oct 30, 2012 (7:20 am)
Having trouble with the Starter. The original starter was making a noise after I started the car. Took to my mechanic--the starter was bad--He installed three. The first two sounded like the drive was hanging into flywheel. The third isn't as loud, but it a clinging sound is coming from it. I'm afraid the flywheel will go bad on me.
Was wondering if there was a spacer missing between starter and flywheel housing???