Sign In Join 



Dodge Sprinter: Starting/Stalling Issues

60 messages,  Last post on Oct 20, 2009 at 8:15 AM

You are in the Dodge Sprinter Forum. Your Host is Karens

What is this discussion about? Dodge Sprinter, Dodge Sprinter Cargo, Van


Messages Page 6 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion

#42 of 60
2003 Freightliner Sprinter 2500, 60,000 m, 25 mpg by oves
Jul 03, 2008 (12:26 pm)
Reply
If I had as many problems as "jverrelli," I'd have had the van taken back by the dealer as a lemon, not left it on the road to harm someone else. I wonder what the chances are that the mechanics screwed up more than they fixed? Those smashed headlights? hmm...
 
Our parts and repairs have come through a Freightliner dealer.
 
The EGR valve was replaced at 35,000+, just under the warranty expiration.
 
The "loss of power" was clearly due to the fuel filter which I just replaced. I had to drive it for a short while in that condition while finding the filter, directions for replacing it, and something else to drive while hunting. A useful owner's manual would be nice. I've downloaded a free pdf of the Service Manual. That'll do.
I can say that it started fine throughout and never just quit altogether. That sounds like another issue.
 
The passenger side door neither responds to the key signal nor to the lock switch. Since that happened simultaneously and all the other doors work properly, I think it's probably the door's motor that's out. Does that sound logical? Any other ideas?
 
Otherwise, the Sprinter is a pleasure to drive and use
#43 of 60
2003 sprinter dies & will not start by breadman1960
Aug 01, 2008 (6:17 am)
Reply
I have a 2003 sprinter with 150,000 mi It will not start in the mornings without using starting fluid and will run for 2 hours and then suddenly die ( usually under acceleration or on a hill ). It will restart with the starting fluid. I make deliveries for 2 to 4 hours a day and leave the truck running all the time.
The dealer has replace 1 glow plug and the "module" with no success.
Anyone have any ideas?
#44 of 60
Re: 2003 sprinter dies & will not start [breadman1960] by ladydi007
Aug 01, 2008 (7:28 am)
Reply

Replying to: breadman1960 (Aug 01, 2008 6:17 am)

Sounds more like it's not getting fuel....have you had them check the fuel filter or fuel pump? When the van dies do you smell fuel? When you first try to start it in the morning, do you have electrical power (dash lights, etc)? We have a 2004 for sale here in Arkansas if you're looking for an upgrade.
#45 of 60
New owner of used Sprinter by ranito
Aug 06, 2008 (6:00 pm)
Reply
I just bought a used 2003/144WB tall roof with the idea of converting it to a camper.
Reading your posts I got scared. Did I do the wrong thing?
The vehicle has some problems. After running for 1/2 hour did not want to start, I
waited for 20 minutes and it run fine. Looks that this is a common problem.
I need help/suggestions/opinions on the following:
1.-I downloaded a manual that has all the DBR III codes but found out the price of
     a DBR III reader, I can not afford it so can someone please advise if a I buy a
     CAN-BUS OBD-II would it read the codes? does it have to be Mercedes or any
     CAN OBD-II? ther are some made in China for $35
2.-Problem. When I drive at speeds of 40-50-60 MPH runs fine, the transmission
  shifts nicely both manual and auto, but when I go to a STOP and it slows down
  with the engine, not the brake, at 25 MPH a horrible vibration occurs below
   somewhere around the transmission. I looked under and tested the driveshaft
   shaking it Up and Down and sideways, there is a small click around the bearing
   that holds and connects the two shafts. Could this bearing be the problem?
   has someone experiewnced this problem?
Dear people your response will be greatly apprciated.
#46 of 60
To All Sprinter Owners.......To Be Cont'D............ by los5961
Oct 18, 2008 (5:56 pm)
Reply
Hi,I have a 2006 Dodge Sprinter and have Stalling issues that has seen the local five star dealers about 6 times(stalled 10 times) and still no cure.This has been ongoing since I had bought it in 2007,it was brand new with 0 miles.In fact,it had Stalled while i was Test driving,but they had told me that it had "stalled" because it was low on diesel.Anyways i contacted an Attorney and are looking for others i can possibly refer to the Attorney for a possible Class Action Lawsuit,because right now,they are trying to settle for a small sum and i'am suppose to keep the lemon van.I figure if i can get at least 20 - 30 People with similar Issues,then we should be able to have a good case.Also,my brakes have been squeeking since purchased.This may be another claim,not sure.Once i get enough people to file with,then will see.Ask anyone with a Sprinter and get the word around,cause together we will have a Loud Bark.
#47 of 60
Re: I gave up!!!!! [kenbaker] by sprintertech
Nov 02, 2008 (8:17 am)
Reply

Replying to: kenbaker (Jan 08, 2008 9:09 am)

the brake rotors on sprinters are designed to be replaced and are not able to be machined,they only have 3 mm of alowable wear before they are at there min. thickness.crazy germans!the sensors on the brake pads are a simple ground wire that rubs on the rotors and compleats the circut that turns on a warning light,these sensors were redesighned in '04 but they still dont work verry well,they do need to be replaced if the plastic has been worn off because the contact is now exposed and can complete the circut.
#48 of 60
Starting Issue by kjarland
Nov 10, 2008 (6:49 am)
Reply
I have a 2008 Winnebago View RV on a 2007 Sprinter chassis. It would not start on starter battery and also on aux.. Road service could not start with a jump. RV was towed to service center and they say the battery is fine but ignition switch is bad. One person on the View website says it could be the SKREEM Module. Cant find any reference to this number. Anyone have any other clues?
#49 of 60
Re: Starting Issue [kjarland] by sprintertech
Nov 13, 2008 (5:03 pm)
Reply

Replying to: kjarland (Nov 10, 2008 6:49 am)

DOES THE KEY TURN? 2008 SPRINTERS HAVE AN IGNITION MODULE CALLED A CENTRAL GATEWAY,IF THE KEY TURNS IT SHOULD BE OK,DO YOU HAVE A START ERROR ON THE DASH?MY FIRST THOUGHT IS TO CHECK THE BATTERY DISCONNECT BY THE ACCELERATOR PEDAL(BLACK WIRE WITH A RED END)THESE GET NOCKED OFF ALL THE TIME.
#51 of 60
Re: Starting Issue [kjarland] by lifttech
Dec 18, 2008 (6:09 am)
Reply

Replying to: kjarland (Nov 10, 2008 6:49 am)

A popular problem with a no start, no crank condition is the failure/locking up of your WCM(Wireless Control Module) also refered to as a SKREEM module (Sentry Key Remote Entry Module). ***You may be able to temporarliy unlock/ reset this by disconnecting and reconnecting the negative battery terminal.*** The condition happens in cold/dry weather conditions and has to due with electrostatic discharge from the ignition key to the WCM (see above). This conditioned is corrected by replacing the WCM $800- $1000 parts & labor:(
This directly ties into the remote keyless entry so use the key only to open and lock the doors. Do not use the key fob.

Messages Page 6 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement