Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Vans & Minivans Dodge Sprinter Dodge Sprinter: Starting/Stalling Issues
60 messages, Last post on Oct 20, 2009 at 8:15 AM
You are in the Dodge Sprinter Forum. Your Host is Karens
|
yes so far its working fine. I keep hoping this will be the last repair for a while. I have almost $2000.00 in repair and service work, light bulbs, SRS, Heater switch (twice), trans flush, Tires, and one injector. Plus the regular filter changes. I hope its the end for a long while. I hope this helps others. Bob |
|
|
|
|
Replying to: dayipper (Jul 03, 2007 5:49 am) 
|
|
|
Replying to: sprinterdude (Nov 04, 2007 10:25 am) |
|
I have a 2007 Sprinter that is used for courier work. My boss had me duplicate the original key which also had a power button lock. I was using the duplicate to unlock the door and the key sheared off at the part where the "cuts and grooves" start. First, is it legal to duplicate that kind of key at a lock shop? Second, is that duplicate key of the same quality and integrity of the facory key? Any help would be appreciated. Thanks.
|
|
|
Replying to: sabby123 (Nov 24, 2007 3:21 pm)
|
|
|
Replying to: kurt6 (Nov 24, 2007 8:13 pm) So, the BLADE of the key should be OK, but if it broke off, then the quality is BAD. If you just need a new blade (to relpace a bad one), then you should be able to use it in the original remote, or just always have the remote with you. KenB
|
|
| My 2004 Sprinter is blowing the 15 amp fuse to the engine control unit and not starting. This just happend for the first time today. The van started this morning and when I put in gear it stalled and would not restart' checked fuse and found blown 15 apm ecu fuse replaced and blew again. Anybody else have this problem? | |
im a licensed electrician in nyc i bought a 2003 sprinter 3500 in jan 04 it was a leftover. i bought this van when i started up my business,i had waited for 2 years to make the jump from employee to employer and one of my happiest days was when i picked up my van from merrick dodge and drove it home,this is when the fun started.as i drove my van in january i couldnt wait to get the heat going to bad for me it was broken and did not function except for cold air, i learned this later because 2 miles from the dealer i ran out of fuel and the engine never had a chance to warm up, thats how the dealer sold me the van with no fuel.in my excitement i didnt realize the fuel gauge.the next day i drove back dropped it off to fix the heat 3 days!! later they called me said it was fixed.GREAT RIGHT, lets start to do electrical work and make money WRONG!!! the next morning my driveway was filled with diesel fuel there was a hole in the tank from the "factory", when a bracket was installed near the tank you could see a drill bit mark of some sort that penetrated the tank about an inch from the bottom.YAY MY FIRST ROADSIDE TOW !! funny how i didnt notice fuel leaking when i filled it up after running out on my first drive home, the van was towed to the dealer and they showed me the hole we were all shocked!!.now starts the breakdowns,the van performed very well for about 2 months, after that starting up in the cold or damp air was a real problem. from october to april of each year from 2004 to present day i have had about 10 no starts per the "no start season"well today was my first no start im very happy i made it to december last year this happened in september.each no start resulted in a tow back to the dealer and as always it was a "fuel"problem and a few times i was charged a few bucks because bad fuel is not a covered item.i have never had a real explanation from the service dept. its always a fuel problem or bad diesel or clogged filter once i was told it was the battery im an electrician and did a load test,it was fine. today was a wake up call this van has cost me alot of lost income while at the same time spending money for repairs. also i didnt even get into the other items like a 1200 dollar sevice from the dealer, and brakes that needed roters twice, i started off loving the sprinter that was until i owned one running an electrical contracting firm in nyc is tough enough, having a 40,000 truck that starts sometimes and dealer service that stinks is enough to give up.i purchased a new chevy it gets 12 miles to the gallon but it was almost half the cost, i cant stand up in it,it doesnt hold as much but it has ac,heat and it starts everytime. sorry for the sob story but its 100% true
|
|
|
Replying to: jverrelli (Dec 06, 2007 8:16 pm) Having bought a new 2004 in 2005 (last on lot sort of thing), I am more and more happy that mine was completely assembled in Germany and checked out thoroughly by someone (and delivered with a full tank)... I bought a wagon (passenger) model. My dealership problems, however, have not been much better... however, i have never had a fuel problem, and am still on the original filter (39K miles). I have the new filter, and no time to install it... I won't pay over $120 for the dealership to install it!!! No brake problems yet, but certainly we have seen forums mentioning the need to replace rotors and pads together for some people, especially heavy in-town drivers/delivery people. Daimler Chrysler should be sorry that they sold you such a problem. I have driven Chevy, Ford (gas and diesel), and very seldom a Dodge Ram van... and now a Sprinter. For my good luck (knock wood) the Sprinter is the best, but it is not driven for work, just back and forth to work... My maintenance, on my van is working so much better than the dealership work. KenB 
|
|
You are here:
Forums
Vans & Minivans Dodge Sprinter Dodge Sprinter: Starting/Stalling Issues
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Dodge Sprinter
2009 Dodge Sprinter Cargo
Browse by Board
Browse by Topic
Today's Chats
