Last post on Oct 26, 2013 at 6:14 AM
You are in the Ford Explorer
What is this discussion about?
Ford Explorer, Heating / Cooling, SUV
#99 of 536 Re: 2007 Explorer XLT cold dash.... [393clevor]
Mar 20, 2008 (7:30 am)
Joined: 15-March 08
Member No.: 2,997
Ok here’s the whole story…….
I bought the 07 knowing it needed a good cleaning, the sales manager that was driving it spilled a beer in it or it belonged to a drunk… who knows. Anyways I took it to the dealer for a recon and to check this cold dash problem I have. I told the service writer what was going on and that I was an X ASE tech and that I had an idea what was going on… I told him up straight “don’t call me and tell me there is nothing wrong with it” but he did anyways!!!
Went to pick it up that night and went to the sales managers office told him we had a problem and I was not liking it at all! He tried to smooth it over by using the fresh air/recycle option but I quickly took over the conversation and straitened him out. It got to a point where he offered to let me fix it and he would pay me back lol Not….
Anyways I got home with it and when I went to get my launch bucket out of the back…(oh ya when I got it back from the dealer both drivers’ side doors were open…and this is why)… and when I closed the rear door there it was staring me in the face. A nice little ding, looks like it was made with a spring loaded center punch right on top of the rear door…
WTF… I could not believe it. I thought about it for a while and decided not to *censored* about it because I was already the big *censored* down there and I know accidents happen but they could have told me… I brought to the shop with me the next day to install some mud gauds and give it a bath. Got the guards on and had to call the sales man to see if I left something in the truck they let me use. I told him about the ding and that I was more upset about them not telling me about it than someone making a mistake. He got upset and said he was going to talk to them about it but I ensured him that **** happens and not to worry about it I wasn’t.
I hung up with him and started washing it…
Got all the way around it when I came to the pass side fender… there they were two more dings…WTF but these they tried to hide with some lighter color blue paint… I could not believe it…. I could go on forever, just use your imagination…
So I load up the video camera and off I go to the dealer… I counted to 100 before I went in… I walked up to the nice little (not) receptionist and said to her… “Hello I have a major complaint who would I talk too” Hold on please… I excused myself and went to the bathroom so I could start the camera… no vid but I got the conversation…
Got to the General Manager told him what was going on, who I was and what I wanted… Bla Bla Bla
I got to talk with thier head technician, he seemed to be ok..... it was going to be 19 degrees the next day so I left it with them to have in the morning (something I mentioned to the service writer the first time)… I called today and they said they confirmed my complaint and had a regional technician on his way to look at it… Haven’t got to the dings just yet… he had the recon guy retouch it up thinking that was going to be good enough. He never let me finish my answer when he asked me if it would be ok to just tough up those spots with the right color. Not…. I’ll keep you all posted….
Well.... They confirmed my complaint... but they said they drove another 07 and it too blew cold air on the driver’s legs... normal!! Sorry come get your truck... and all they did was touch up the paint, I told them that was unacceptable and they needed to fix the dents...
... So ford designed the 2007 explorer that way...I think not.
Any ideas what I should do...??
I'm at the point where I am going to let the finance company repo it... I don’t care anymore I’m getting tired of this, it has consumed my head to a point where I just don’t care… why should I be stuck with a truck that’s freezing cold in the winter and has three dents in it…
Here’s the message that was on my phone when I got to work..
YouTube - 2007 Explorer cold air on drivers legs
#100 of 536 Re: 97 Explorer Heater won't change to cool [vschwenke]
Mar 20, 2008 (10:19 am)
The blend door is broken, lucky for you it stuck in the all heat position,but as you are finding out as it warms up you are screwed. You cannot just fix the blend door the entire heater box must be replaced. Depending on were you get the plenum, it will cost you around 160.00. If you are replacing this you might as well replace the heater core (aother 45 - 60 bucks.) The rest of the actuators that control various fuctions can be transferred from the old to the new plenum.
I did it myself, but it is not a job to be taken lightly. This involves removal of the dash as well as air conditioning items located in the engine compartment, passenger side on the fire wall. A shop manual is very helpful if you have one. You don't have to remove the dash from the car, just far enough away from the fire wall to slide the box out from under the dash.
There are other "temporary" fixes. But if you plan to keep the vehicle its the only way to go.
To see if it is a blend door issue, open up the gove box and lower it to expose the top of the heater box. You will see the motor that operates the blend door. Unplug and remove. Now take a mirror and look at the hole were the blend door motor goes into the box. It should look just like the part that fits down into it. If not, it has broken and entire box must be replaced.
If you want to do it yourself and need some extra info let me know...
#101 of 536 Re: A/C + HEATER SEMI-BROKE 2002 Ford Explorer. [harkess]
Mar 30, 2008 (11:21 am)
PLEASE HELP. I have a 2003 explorer with identical problem I looked and felt under dash for the suggestion in post 84 but no luck. The only thing I feel that moves is the opening to the adjuster to decide ac,defrost etc.. What am I missing?? Please email at wjmullehotmail.com.
#102 of 536 Re: A/C + HEATER SEMI-BROKE 2002 Ford Explorer. [harkess]
Apr 06, 2008 (5:21 am)
Tried your fix and it does work. I do think that this is temporary as soon as I switch back to AC my problem re-appears. I do think this is a blend door issue. You can manualy fix this each time but this can be a pain in the neck, Thanks for the info.
#103 of 536 Re: Heater not working [bbelasco]
Apr 17, 2008 (3:41 pm)
I have a 2003 Ford Explorer and was told that the it could be the entire heat box or just a small little part . . . but the dash has to be torn out to fix it. Do you have any schematics on how to tear it apart and put it back together? If so, email them to me at jill.tentingergmail.com. Thanks!
#104 of 536 Re: 2007 Explorer XLT cold dash.... [393clevor]
Apr 17, 2008 (4:11 pm)
I don't have the same problem but I can verify that the Ford mechanics at the dealer ship are stupid. I had a whistling sound in my 2003 Explorer in cold weather when I accelerated. It was under warranty so I took it in about five different times and they couldn't "duplicate" the sound. I told them it happened every morning when I pulled out of my driveway so come over to my house and then drive it. It was all set up (and I only live about 1/2 mile away) and then they called at the last minute to just have me bring it in. Of course, it made the noise on my way there but not when the guy got in and drove it 10 miles. I finally took it to another dealership and it took them a full week to even figure it out. It was the alternator so they replaced it and now it's doing it again and I don't have a warranty!
#105 of 536 Re: 2007 Explorer XLT cold dash.... [jilltentinger]
May 14, 2008 (8:30 pm)
I have a 99 explorer that had the broken blend door problem. No help from Ford on the issue! I found a kit on ebay called Heatertreater. It was easy to install, and saved me a ton! This guy is a genius.
#106 of 536 blend door?
Jun 07, 2008 (5:52 pm)
I have the electronic climate control in my "96 eddie bauer. The system's air is going through the defrost vent (both heat and ac). No matter how I try to redirect the air it seems stuck in this position. Is this the blend door or something else?
Jun 27, 2008 (12:53 pm)
I have a 2002 Ford Explorer and am having a probelm with the AC I recently changed out the compressor and and all three blend door actuator (motors) thats for rear and front ac and now my vents are blowing hot air on the driver side and cold on the passenger side. I dont know what else could be the reason for this. Can someone help me?
#108 of 536 02 explorer a/c not very cold
Jul 03, 2008 (11:28 am)
i have this explorer,with climate control.a/c is charged but it is blowing not very cold.i cannot find the the blend door motor.can anybody help me out?