Last post on Oct 26, 2013 at 6:14 AM
You are in the Ford Explorer
What is this discussion about?
Ford Explorer, Heating / Cooling, SUV
#6 of 536 Ford Explorer - Fan Not Blowing Any Air
Jan 31, 2007 (3:33 pm)
It's freezing where I live and I have no heat because the blower is not sending out any air! I tried to search the forum but need help. The first time it wasn't working, I changed the fuse and it came back on right away. Now it's not working again, I replaced the fuse again but no luck. I am not able to afford to see a mechanic so if there is a simple check or fix (for a woman) I would appreciate any and all advice. Thanks!
#7 of 536 Question about Fuse
Jan 31, 2007 (4:37 pm)
Referring to my question above, can anyone please tell me why changing the fuse would work once but did not work again? Please help, it is a 10 below windchill here and I need heat!
#8 of 536 Re: Ford Explorer - Fan Not Blowing Any Air [explorermom]
Feb 01, 2007 (2:04 am)
Silly questions time.What year is the truck? Does it have electronic climate control? Was the fuse blown the second time you changed it? Does it send air at any fan speed? Does it work in defrost?
#9 of 536 Auto Climate control works only on high air
Feb 13, 2007 (10:02 pm)
My 95 Explorer, auto climate control works only in high air. The options for low and medium speeds don't work. Heat and cold works ok but only with high air. Also when I hit the auto bottom it don't work. Is there a relay I should replace or just the fan?
Mar 09, 2007 (3:29 am)
I have a 1998 ford explorer limited. My heat and ac have always worked but it seems it only has one setting, extremely hot or extremely cold. A few weeks ago the heat stopped working. I turned on the ac then switched back to heat and it started working again. My heat once again stopped working a few days ago and now I cant get it to work at all, it just blows cold air. Anyone have any clue what might be wrong and how i can fix it?
#12 of 536 1996 Explorer Heater and AC problems
Mar 20, 2007 (1:55 pm)
My 96 Explorer blows hot air thru all heater modes, all vents work perfect, just hot air all the time. I replaced the diverter valve [[vacuum controlled valve that controls water flow to the engine compartment]. I replaced the control rheostat that is supposed to switch from cool air to hot air. Worked for about 5 seconds. Also the AC does not work. I have a friend with a 98 P.U. with the same problems.
#14 of 536 Heater problems
Apr 08, 2007 (10:31 am)
My heater is blowing cold air. Once in a while I can turn on the air and then switch back to heat and it will start working. Any help is appreaciated, thanks...Don