Sign In Join 



Ford Explorer AC and Heater Problems

237 messages,  Last post on Nov 27, 2009 at 10:43 AM

You are in the Ford Explorer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Explorer, Heating / Cooling, SUV


Messages Page 23 of 24
1
...
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion

#217 of 237
Re: '93 Explorer Blower Intermitant [air_door_fix] by mohrling
Aug 08, 2009 (7:39 am)
Reply

Replying to: air_door_fix (Jul 13, 2009 11:02 am)

Thanks! Problem was isolated in the wiring at the motor. This was an easy change out to another blower motor and we've got the A/C blowing again.
#218 of 237
1998 Ford Explorer A/C get's warm at highway speeds by dobbsa
Aug 24, 2009 (1:58 pm)
Reply
I have a 1998 Ford Explorer. The A/C works fine at idle up to moderate speeds. Once it is at highway speeds, then the A/C turns warm. When I slow down the A/C gets cold again.
 
I don't know if this is a vacuum leak under the hood somewhere, or if it is the under the dash door problem. Any help appreciated!
#219 of 237
AC Controls Not Working After Installing Radio by rkohlbeck
Sep 13, 2009 (3:58 pm)
Reply
I have a 2006 Ford Explorer XLT V6. A week ago, I installed a new stereo head unit into the vehicle. I reconnected all the climate controls wires back into the slots. The illumination works on each of the manual dials, but when you switch the activation dial on the right to one of the fan blowing options, I get nothing. I looked at the fuses, but none of them seem blown. Any ideas would be most helpful?
#220 of 237
o2 explorer no heat by gdffred
Sep 27, 2009 (3:20 am)
Reply
My problem started with the swith over from defrost to front vent heat would take awhile to switch over. Now I have a noise under the dash and no heat
#221 of 237
no heat by gdffred
Sep 29, 2009 (2:04 am)
Reply
My problem started when I would try to switch from floor heat to defrost and to vent exc. Now I have a clicking noise under the dash and no heat! Is there a temp repair until i can get to a repair shop and if so how do you locate the flap Iam hearing so much about
#222 of 237
Re: A/C + HEATER SEMI-BROKE 2002 Ford Explorer. [harkess] by hash_penni
Sep 30, 2009 (10:08 am)
Reply

Replying to: harkess (Jan 28, 2008 7:42 am)

I am having this same problem...i have tried doing this already and it is not working...this may sound crazy, but do you have any more specifics on this...the knocking drives me crazy because i need heat!!!
#223 of 237
Re: no heat [gdffred] by leumas
Oct 04, 2009 (4:57 pm)
Reply

Replying to: gdffred (Sep 29, 2009 2:04 am)

did you get an answer , i have exactlyu the same problem , no heat and th clicking noise
#224 of 237
Re: no heat [leumas] by hash_penni
Oct 05, 2009 (4:41 am)
Reply

Replying to: leumas (Oct 04, 2009 4:57 pm)

I figured out the problem. The blend door is broken, and i tried what the lady had said to do, but it didnt work. so i bought the part from napa online, and you can replace it by yourself, but it takes some work. i am picking my part up today, which is only 13 dollars, and i am fixing it on saturday. when i get it done i will let you know how it goes! http://www.explorerforum.com/forums/showthread.php?t=214332
here is the link that i am using to help me with the replacement, and i bought a repair manuel. i am sorry this is all the info i have for now.
 
http://www.napaonline.com/masterpages/NOLMaster.aspx?PageId=470&LineCode=BK&Part- Number=6601810&Description=Heater+Blend+Door+Repair+Latch
here is the link for the part.
 
i hope this helps you a little!!
 
kasey
#225 of 237
Re: Blen door actuator - Motor [crystalsilguer] by jenk1
Oct 07, 2009 (10:30 am)
Reply

Replying to: crystalsilguer (Jul 14, 2008 6:40 am)

I have pulled out as much as I can on the drivers side and still can't find it???
#226 of 237
Re: Blen door actuator - Motor [jenk1] by apachebird
Oct 07, 2009 (10:50 am)
Reply

Replying to: jenk1 (Oct 07, 2009 10:30 am)

if u can see on the other side where the blend door sits ( the axle of the door) go straight across from there on the drivers side the motor will right in that area it has 3 screws and a small plug ,, warning i replaced the motor in mine and it did the same thing after the first two times finally figured out it was the blend door itself needs to be replaced , cold has set in so i will repair it when it warms up however i did rig a piece of kite string to pull the door open and heat the car works fine now like new .

Messages Page 23 of 24
1
...
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement