Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Vans & Minivans Chrysler/Plymouth Voyager, Dodge Caravan Caravan/Voyager Electrical Issues
289 messages, Last post on Sep 28, 2009 at 11:24 AM
You are in the Chrysler/Plymouth Voyager, Dodge Caravan Forum. Your Host is Karens
| I have a 1996 Dodge Caravan with a non-functioning windshield washer pump. I picked up a kit at the parts store that is nothing but a pump motor, it looks like it must mount right on the bottom of the washer fluid bottle. Am I correct in this assumption and can someone tell me how to get to the fliud bottle to replace it? | |
|
i have purchased a 2001 grand caravan which is loaded.the other day the fan stopped working for the front control so i had no defrost.the next day it was working again but when i shut the vehicle off and restarted it fan was not working again.checked fuse was ok.12v at fuse holder.need to get in to fan.never got behind dash console before does anyone have suggestions on location and helpfull advise. 1st time repairer appreciates help!! |
|
i just purchased this van TODAY was told on 5 seperate phone calls that it only needed one thing , so we went and bought it was a low price ,, anyway we got home the headlights , brake lights and radio are not working when u turn the head lights on it makes a constant buzzing sound and for some reason when u put on brake it goes away but let go it comes back its very weird we have replace dthe bulbs and the van runs great but i have no CLUE on how to fix this or what to look for i really need some help , i need to get it on the road but know it wont pass inspection if u can help me or have any idea why this is happening please email me at amycnew verizon.net i would appreciate it so much thanks in advance!!! 
|
|
|
Replying to: amycnew (Apr 05, 2009 9:02 pm) Best regards, Shipo
|
|
|
Replying to: shipo (Apr 05, 2009 9:09 pm) - not working instrument cluster, all the gauges at zero, no display for distance or trip - not working wiper intermittent - not working speed control (tempomat) - when loocking the doors it unlock imediately But, sometimes when driving, the instrument cluster start working. I have already check the fuses, relays, conectors, remove the BCM and reinstal, resolder conector on instrument cluster panel, put the ground (-) wire direct to pin 7 on instrument cluster conector because I do not found the ground G200. Disconect clockspring conector, disconect conector on HVAC. Any idea?
|
|
|
Replying to: ringalori (Apr 07, 2009 5:19 am) This sounds like a classic instrument cluster failure. Back in the mid 1990s many manufacturers (including Chrysler) started using different solder to comply with new federal guidlines, unfortunately that new solder compound hasn't proven to be as durable as the old stuff. What this means to you and your van is that one or more solder connections in the instrument cluster have failed. The good news is that the fix is (apparently) quite simple. Remove the instrument cluster and touch each solder point with a hot soldering iron for a moment or two, just enough to cause the solder to re-liquefy, and then put it all back in. If you sift through this thread you should find reports of others doing the same thing, and if you query the web at large, you should find even more reports of how well this fix has worked. That said, our 1998 never suffered from this problem so I have no firsthand knowledge of the actual removal and replacement procedure for the cluster. Keep us posted. Best regards, Shipo |
|
Our van has dash lights, but there is no speedo, fuel, turn, or hazard lights the head lights and day time running lights are working. no high beam. I have removed and re set the 10 amp fuse at the ioc location. All other fuses check out ok. If it was the bcm, would i still have cluster and head lights.
|
|
|
Replying to: dcousens (Apr 08, 2009 9:26 am) |
|
|
Replying to: jsilva2 (Feb 21, 2007 7:18 pm) Ryan in Oregon |
|
Hello--I just bought a Caravan from a local mechanic shop. The owner brought it in because the speedo wasn't working.The mechanic thought it was the BCM and put one in from a different year and he said it went nutz with door locks cycling and some other weird things.He tried another BCM and it would no longer start. I put the original back in and all the accessories work(cept the windshield wipers just stop wherever they are when you turn off the switch) but nothing happenes when you turn the key to start the vehicle.Seems like the van is in a lockdown mode like the antitheft is restricting the fuel from getting to the injectors.I can jump the starter from the relay and get it to turn over.Does anyone know how to reset this to run? Thanks.
|
|
You are here:
Forums
Vans & Minivans Chrysler/Plymouth Voyager, Dodge Caravan Caravan/Voyager Electrical Issues
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Dodge Grand Caravan
2003 Chrysler Voyager
2000 Plymouth Voyager
Browse by Board
Browse by Topic
Today's Chats
