You are here: Forums Pickups Mazda B-Series Mazda B-Series Electrical/Lighting/Computer

Mazda B-Series Electrical/Lighting/Computer

16 messages,  Last post on Oct 01, 2009 at 8:31 PM

You are in the Mazda B-Series Forum. Your Host is kcram

What is this discussion about? Mazda B-Series Truck, Lights, Electrical, Truck

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#12 of 16 MAZDA B3000 PICKUP by kukubay Mar 23, 2009 (2:05 am)
THE AIRBAG LAMP KEEPS BLINKING ON MY DASH.IT IS A 2001 MODEL.COULD PLEASE TELL ME WHAT IT IS? Replies to this message: kcram (Mar 24, 2009 5:20 pm)
#13 of 16 Re: MAZDA B3000 PICKUP [kukubay] by kcram HOST Mar 24, 2009 (5:20 pm)
Replying to: kukubay (Mar 23, 2009 2:05 am) Normally, that indicates a malfunction in the air bag system that will keep it from deploying in the event of a collision that normally would cause inflation. That needs to be checked as soon as possible.   kcram - Pickups/Wagons Host
#14 of 16 TSB 09010703 ? by russell17 Jul 29, 2009 (6:45 am)
How do you do...looking for a starting point..for DIY... (2004 B2300) Turned on the lights the windshield wipers/wash came on... pushing the windshield wash button, instuments lights came on.. next day tried the lights and horn now blows !   >OBD code is zero  >Disconnected then reconnected negative battery terminal         (still get the horn when I turn on the lights...) I'm trying to figure out how to get into the steering column? Is the above TSB about this problem? couldn't locate full text and and diagrams. Thanks for any ideas, russell17
#15 of 16 12v constant by willem5 Oct 01, 2009 (3:28 pm)
i got a 84 b2000 that the previous owner put a aftermaket radio in. it is not wired to a 12v constant wire. i was going to splice into the cig. lighter, but the lighter doesn't work unless the key is turned forward. i am wondering what the color the 12v constant is and where a good place to tap into one would be. any help would be appreciated.
#16 of 16 How to Remove Light Switch on 91 B2600I Mazda PU by rockhoundrider Oct 01, 2009 (8:31 pm)
My head lights won't go on and the lamps are good, it started out with an intermitant problem, now can not get head lamps to come on, everything else works fine. I need to know how to replace the switch on the colume, the manual is not vary good in this respect. Also, could it be a bad light relay and where is it located? or can the light switch be serviced once it is removed, does it come apart or is in one unit with all the functions sealed in a uni type switch? Any help would be appreciated. Oh yea, does the horn and stearing wheel bolt cover need a special tool to remove so you can remove the stearing wheel to get at the light switch behind it?   Thanks for amy help.   Rockhound Rider

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Mazda B-Series Mazda B-Series Electrical/Lighting/Computer