You are here: Forums Pickups Mazda B-Series Mazda B-Series Transmission Problems

Mazda B-Series Transmission Problems

12 messages,  Last post on Dec 12, 2008 at 8:38 PM

You are in the Mazda B-Series Forum. Your Host is kcram

What is this discussion about? Mazda B-Series Truck, Transmission, Truck

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#10 of 12 Re: 2000 b3000 transmission problem [jclark5] by tanker41 Dec 06, 2008 (9:53 am)
Replying to: jclark5 (Sep 17, 2008 2:25 pm) Sorry, I don't have the solution. I am hoping that you have found out what was wrong. My 2001 B300 with 123,000 miles on it just developed the same problem today. Any info you have would be great. Thanks Replies to this message: jclark5 (Dec 06, 2008 12:29 pm) tanker41 (Dec 12, 2008 8:38 pm)
#11 of 12 Re: 2000 b3000 transmission problem [tanker41] by jclark5 Dec 06, 2008 (12:29 pm)
Replying to: tanker41 (Dec 06, 2008 9:53 am) i still do not have my transmission fixed. i changed the fluid and the filter and it did not help at all. I also checked my u joints and they are fine. over on the ford ranger forum there are many people who have the same problem with there transmisson. one said they had it serviced and the dealer could not find anything. im going to take mine to a shop to see if they can find anything. if you find out anything about yours let me know. it must be a simple problem because i still drive mine 75 miles a day with no problems other than the light flashing and the hard shift from first to second Replies to this message: tanker41 (Dec 12, 2008 8:38 pm)
#12 of 12 Re: 2000 b3000 transmission problem [jclark5] by tanker41 Dec 12, 2008 (8:38 pm)
Replying to: jclark5 (Dec 06, 2008 12:29 pm) I do not have good news for you! I took my truck to a very highly recommended trans shop that we have never heard anything negative about . The diagnosis on the 2001 Madza B300 was that the servo was melted and that meant the transmission needed rebuilt. They rebuilt it and put in a new converter at the cost of $1391.00 . Good news is that the truck is running like brand new.The tech said that it had a ford transmission and that when they built the rangers and mazda trucks that they put the exhaust too close to the transmission and that it heats up and over time, melts the servo. He sees it all the time. Hope this info is helpful to you.

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Mazda B-Series Mazda B-Series Transmission Problems