You are here: Forums Pickups Mazda B-Series Mazda B-Series Engine Problems

Mazda B-Series Engine Problems

57 messages,  Last post on Oct 09, 2009 at 10:23 PM

You are in the Mazda B-Series Forum. Your Host is kcram

What is this discussion about? Mazda B-Series Truck, Engine, Truck

Messages Page 4 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

#25 of 57 Re: 89 Mazda B-2200 Running Roughly [tdharness] by the_bean Feb 29, 2008 (10:47 am)
Replying to: tdharness (Dec 03, 2007 4:24 pm) if your engine is causing you too much grief i have an 86 b2000 engine that i'm wanting to sell. its got 0 miles on everthing but the block, oil pan and 5speed manual tranny. the engine was build with all new parts by car quest 2 years ago and i've even bought a header and new intake manifold, clutch and flywheel for it. every thing has been cleaned and the engine, header, intake and a few more visible parts have been primed and high-temp painted. it has no carb though but if you'd lie it just make an offer and we can discuss it. i can even have it shipped if needed. Replies to this message: 7801brian (Dec 31, 2008 6:46 pm)
#26 of 57 mazda b4000 4/4 v6 auto by dog493 Mar 06, 2008 (5:26 pm)
I was thinking about getting one,are they any good? year 90s Thanks Replies to this message: dog493 (Mar 07, 2008 12:31 pm)
#27 of 57 Re: mazda b4000 4/4 v6 auto [dog493] by dog493 Mar 07, 2008 (12:31 pm)
Replying to: dog493 (Mar 06, 2008 5:26 pm) Iwas thinking a about getting a used mazda 4000 4/4 4.0 v6 in the late 90;s are they ok ???
#28 of 57 anyone experienced this? by bifft May 02, 2008 (8:31 am)
2007 B-3000, history: She smacked her driver rear bumper into a very mature Ash tree while backing out of a parking slip. She only traveled about 18" but they went by real fast! The driver side bumper crumpled properly, the only visual damage. Since, at least twice a month, she's shut-off in mid-flight. Heavy traffic, open road city hiways or country lanes; she has no real preference. She had a look over in approximately december 2007 and was pronounced a hypochondriac, nothing was wrong! Yet...! She's been in the shop for three weeks now and the latest cure is to replace "the computer", fortunately on Mazda's dime. Otherwise, best darn truck I've ever owned! Any ideas?
#29 of 57 Engine dies after warm-up by rds5 May 04, 2008 (10:28 am)
My 1989 Mazda B2200 pickup dies after warm-up. It restarts but runs extremely rough with no power. Any ideas out there on what the problem might be Replies to this message: the_bean (May 05, 2008 7:42 am)
#30 of 57 Re: Engine dies after warm-up [rds5] by the_bean May 05, 2008 (7:42 am)
Replying to: rds5 (May 04, 2008 10:28 am) I'd start by checking the fuel and air filters. but you may also have too much back pressure from a clogged exhaust. another thing could be the carb. the truck is almost 20 years old and could just need a simple tune up
#31 of 57 vacume lines by bigsandy Jul 14, 2008 (8:02 pm)
I have a 1987 B2200 and I am having a lot of problem with vacume lines. Is there a diagram of lines for a california truck and a diagram of a non-california truck so I can figure out which is totally needed and which are not? Replies to this message: the_bean (Jul 16, 2008 7:30 am) bigsandy (Jul 19, 2008 10:37 pm) the_bean (Jul 21, 2008 11:39 am) chyarrow (Nov 16, 2008 1:29 pm) mighty2 (Feb 28, 2009 7:07 am)
#32 of 57 Re: vacume lines [bigsandy] by the_bean Jul 16, 2008 (7:30 am)
Replying to: bigsandy (Jul 14, 2008 8:02 pm) oh yeah. just pick up a chiltons manuel for your truck. it'll be no more than $20 and will have everything you need (complete wiring and vacume line diagrams) Replies to this message: bigsandy (Jul 19, 2008 10:37 pm) the_bean (Jul 21, 2008 11:39 am)
#33 of 57 Re: vacume lines [the_bean] by bigsandy Jul 19, 2008 (10:37 pm)
Replying to: the_bean (Jul 16, 2008 7:30 am) Hmmmmmm the person thats fixing my truck has a copy but claims there is no diagram. Maybe he has a different book.   Thank's,   Sandy! Replies to this message: the_bean (Jul 21, 2008 11:39 am)
#34 of 57 Interchangeable Carb? by bigsandy Jul 19, 2008 (10:42 pm)
I have a problem with a 1987 B2200 pickup that idles very high. Someone said it could be the carb. Is there a different carb that will work? I saw where someone mentioned a Nikki carb? Could you please give me some info on that? The person fixing the truck also thinks it might be the float and is just trying to fix that. Any comments or suggestions are very welcome. (help)   Sandy!

Messages Page 4 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Mazda B-Series Mazda B-Series Engine Problems