- #10 of 16
-
Only two problems
by paradox2
-
Jan 30, 2008 (3:58 am)
-
|
|
Geez, I wish that were the case for my Lucerne. Mine is garbage..... I can list you 20+ things wrong with mine, some of which have been corrected after numerous visits to the dealer, and others that they cannot/will not fix. Wack on the head...I 'shuda' bought a Lexus.
|
- #11 of 16
-
Re: Two problems I am having with my CXS [estamper]
by imidazol97
-
Jan 30, 2008 (8:44 am)
-
|
|
Replying to: estamper (Dec 15, 2007 10:06 pm)
Some cars I've had in the past had a 6 inch piece of rubber around the middle of the bar to keep it from making a noise against the other one. Maybe yours should have had it from the factory or it got knocked off somehow.
|
- #12 of 16
-
Re: Two problems I am having with my CXS [estamper]
by imidazol97
-
Jan 30, 2008 (8:41 am)
-
|
|
Replying to: estamper (Dec 15, 2007 10:06 pm)
On some cars in the past there was a piece of rubber rube around one torsion bar. It was about 6 inches long or less--just enough to keep them from touching. I'll bet yours should have had one from the factory. That would cause a noise in an area hard to diagnose and you would only hear it under certain bumps and movements while driving!
|
- #13 of 16
-
Re: Two problems I am having with my CXS [estamper]
by imidazol97
-
Jan 30, 2008 (8:23 am)
-
|
|
Replying to: estamper (Dec 15, 2007 10:06 pm)
On some cars in the past there was a piece of rubber rube around one torsion bar. It was about 6 inches long or less--just enough to keep them from touching. I'll bet yours should have had one from the factory. That would cause a noise in an area hard to diagnose and you would only hear it under certain bumps and movements while driving!
|
- #14 of 16
-
Re: Two problems I am having with my CXS [estamper]
by imidazol97
-
Jan 30, 2008 (8:23 am)
-
|
|
Replying to: estamper (Dec 15, 2007 10:06 pm)
On some cars in the past there was a piece of rubber rube around one torsion bar. It was about 6 inches long or less--just enough to keep them from touching. I'll bet yours should have had one from the factory. That would cause a noise in an area hard to diagnose and you would only hear it under certain bumps and movements while driving!
|
- #15 of 16
-
Temp sensor
by oldguy8
-
Apr 30, 2008 (1:18 pm)
-
|
Has anyone had trouble with the outdoor temp. sensor?
Mine sometimes registers a false reading.
|
- #16 of 16
-
Re: Two problems I am having with my CXS [nugba]
by waylanddon
-
Apr 05, 2009 (3:42 am)
-
|
|
Replying to: nugba (Nov 07, 2006 12:45 pm)
We have a 2008 Lucerne that has had the battery run-down problem. This happened after the car sat for 3 or 4 days. Had it back to the dealer 3 times. They could find nothing, but did install a new battery. Interesting that it was mentioned in another reply that the ONSTAR was the problem. I too am having onstar problems, which the dealer is yet to resolve. Guess I'd better print this off and take it to the dealer.
|