You are here: Forums SUVs Land Rover Land Rover: OBD II Codes

Land Rover: OBD II Codes

15 messages,  Last post on Sep 15, 2009 at 11:27 AM

You are in the Land Rover Forum. Your Hosts are steve_ & tidester

What is this discussion about? Land Rover Discovery, Land Rover LR3, Land Rover Range Rover Sport, Exhaust, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#9 of 15 Can ODB II Scan Land Rover DiscoII? by auris Apr 27, 2008 (3:53 pm)
Hello everyone. I have a DiscoII 02, And I would like to know if there is a compatible scan tool out there. So I can scan and also clear the codes on my Disco II. And which brand in the market are more reliable.. Thanks for the help.. Replies to this message: rhutchings2 (Dec 31, 2008 3:14 pm)
#10 of 15 98 discovery 4.0 eng. by bmack1 May 19, 2008 (6:35 pm)
Have 1998 discovery 4.0 eng. The motor starts fine but will not rev -up. The engine will not rev above 1200 rpm cough and backfires in plenum Replaced spark plugs and spark plug wires. All the new plugs carbon fouled in 5 min. of running checked air cleaner, mass air flow sensor, fuel pressure is 40 psi. compression check 160 to 170 psi, spark is hot to each plug. No check engine light on but did check for fault codes. Codes were p 1194, p 1191, p 0158,p 0138, p 1138, p 0300, p0307, p 0302, p 0301, p 1316, p 1314, p 1313. Codes indicate miss fire to plugs, and o2 sensors. The engine acts like air intake leak but can't find any.   o2 sensors should not have any effect untill the come up to temp.                                                                          Any ideas?
#11 of 15 OBD CODE P0175,P0125 by fguzman Jun 11, 2008 (7:01 am)
Hi I have a 2001 Mitsubishi Montero XLS and I have received the above codes; Fuel Trim too Rich (Bank 2) ; and Insufficient Coolant Temperature for Closed Loop Fuel Control;ECT Excessive Time to Closed Loop Fuel Control. Can anybody tell me how I fix this problems. Thank you.
#12 of 15 Re: OBD port on the LR3? [colddude] by disco1969 Nov 30, 2008 (2:40 am)
Replying to: colddude (Jan 02, 2007 7:57 pm) Hi The obd11 port is in the drivers side footwell look up you will see it
#13 of 15 Re: Can ODB II Scan Land Rover DiscoII? [auris] by rhutchings2 Dec 31, 2008 (3:14 pm)
Replying to: auris (Apr 27, 2008 3:53 pm) Scan Gauge II work great. I use one in my 02 landy. http://www.scangauge.com
#14 of 15 DTC P1775 & P1605 by koolkris1 Jul 02, 2009 (10:33 am)
I HAVE AN 2005 FREELANDER WITC DTC P1775 GEARBOX FAULT AND P1605 KEEP ALIVE MEMORY TEST FAILURE.....ANY IDEAS?
#15 of 15 Codes for a 2001 Range Rover HSE 4.6 by larry038 Sep 15, 2009 (11:27 am)
I have these codes come up in my scanner and dont know what they are for: 1412 and 1415. Can anyone help me?

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Land Rover Land Rover: OBD II Codes