You are here: Forums SUVs GMC Yukon '07 denali XL light bulb type?

'07 denali XL light bulb type?

20 messages,  Last post on Nov 13, 2009 at 3:05 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#18 of 20 Re: HID Lights for 07' Denali [herbedout13] by jjrho Jan 04, 2007 (11:05 pm)
Replying to: herbedout13 (Jan 04, 2007 10:08 am) very easy..just hairy taking off the face plate... got another unit/2nd gen unit from costaletech. have a unit from g-net but not using it; won't let me change volume while it's unlocked...   jR Replies to this message: tomfatboy123 (Dec 30, 2008 1:25 pm) rsht (Nov 13, 2009 3:05 am)
#19 of 20 Re: HID Lights for 07' Denali [jjrho] by tomfatboy123 Dec 30, 2008 (1:25 pm)
Replying to: jjrho (Jan 04, 2007 11:05 pm) Hey guys does any one know how to remove a 2008 GMC Yukon XL headlights...? Tried contacting a local dealer but the wont help... I wanted to install my HID kit that I had receive for X-Mas.... Please help me.... Replies to this message: rsht (Nov 13, 2009 3:05 am)
#20 of 20 Re: HID Lights for 07' Denali [tomfatboy123] by rsht Nov 13, 2009 (3:05 am)
Replying to: tomfatboy123 (Dec 30, 2008 1:25 pm) A side from the two screws that you see from the top of each headlight unit/assembly, there is another screw hidden inside/behind the bumper where you can only get to by partially pull open the black plastic wheel-wall (need to first remove the 2-screws & 2-plastic anchors towards the front side of the wheel-wall). Once you have all three (3) headlight assembly screws removed, then you can skillfully angle the assembly out...   Just thought I ask, do you really want to take the whole headlight assembly out, or just want to replace the bulbs? If just to replace the bulbs, I found an easier way so you won't need to remove the whole assembly but only to remove a few plastic anchors off the splash shields (a soft tar material) directly behind the headlight unit. For the 07 Yukons, on the passenger side, this "shield" is right next to the Air filter housing; for the driver side, its right next to the windshield washer fluid tank. Yes, the access space is quite small (so be careful removing/installing the bulbs - not to drop them), but to me its a hack of a lot easier to get to the bulbs than the factory way and still end-up not able to angle the unit out of its mounting space...

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon '07 denali XL light bulb type?