You are here: Forums SUVs GMC Yukon '07 denali XL light bulb type?

'07 denali XL light bulb type?

20 messages,  Last post on Nov 13, 2009 at 3:05 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#13 of 20 Re: light issue for 07 denali [rsht] by rsht Jan 03, 2007 (10:15 am)
Replying to: rsht (Dec 30, 2006 4:16 am) Readers, please note in my previous post, my reference to the 3157 type bulb for the 2007 GMC Yukon Denali is Incorrect. According to my dealership, its the 7443 type of Bulb. Replies to this message: steve_ (Jan 03, 2007 10:53 am)
#14 of 20 Re: light issue for 07 denali [rsht] by steve_ HOST Jan 03, 2007 (10:53 am)
Replying to: rsht (Jan 03, 2007 10:15 am) Just a fyi, but after posting, you may edit your post for 30 minutes.
#15 of 20 Re: HID Lights for 07' Denali [jjrho] by herbedout13 Jan 03, 2007 (11:48 am)
Replying to: jjrho (Dec 30, 2006 9:44 am) Hey Jim did you do an after market conversion Hid kit to your new 07 denali? Just curious I want to but dont want to put the wrong type in. I'm trying to get the look like the new escalade. Thanks Replies to this message: jjrho (Jan 03, 2007 9:47 pm) herbedout13 (Jan 04, 2007 10:08 am) jjrho (Jan 04, 2007 11:05 pm) and 2 more...
#16 of 20 Re: HID Lights for 07' Denali [herbedout13] by jjrho Jan 03, 2007 (9:47 pm)
Replying to: herbedout13 (Jan 03, 2007 11:48 am) well, i haven't yet but will. i just haven't decided on which h13-2 system to go with; some are H13-2 low with HID xenon, high with halogen and some are dual xenon while there's a bulb that is h13-1 element but with a reflector that moves to make it a high beam- which i'm not sure of....   most are chinese made, a few are european made and $400 for set..   i'm gonna get a 6000K temp bulb; it would be white but not too blue... escalade is probably about there...   it's interesting in that no one seems to have a simple plug/play set up yet.... i just want to be able to plug the harnesses w/o doing any soldering/wiring.... o/w, i have to have the H13 harness and plug the wires to low/high/gnd-common ,etc...   as for the rear bulbs, they sure look like typical 3157s...what's the difference btwn the two ?!?!?   maybe i will just wait another few months for the ipcw people to sell their new unit...o/w, anyone know if the escalade rear LED assembly can be placed into the denali body? although i bet the factory assembly would be quite expensive...   jim R so calif Replies to this message: herbedout13 (Jan 04, 2007 10:08 am) jjrho (Jan 04, 2007 11:05 pm) tomfatboy123 (Dec 30, 2008 1:25 pm) and 1 more...
#17 of 20 Re: HID Lights for 07' Denali [jjrho] by herbedout13 Jan 04, 2007 (10:08 am)
Replying to: jjrho (Jan 03, 2007 9:47 pm) Yea I agree,I want to change them but I don't want to have to deal with a whole wiring system. I thought that website that was mentioned before in another message was a plug and play system. Also how easy was it to install the GM lock pit? Ron Replies to this message: jjrho (Jan 04, 2007 11:05 pm) tomfatboy123 (Dec 30, 2008 1:25 pm) rsht (Nov 13, 2009 3:05 am)
#18 of 20 Re: HID Lights for 07' Denali [herbedout13] by jjrho Jan 04, 2007 (11:05 pm)
Replying to: herbedout13 (Jan 04, 2007 10:08 am) very easy..just hairy taking off the face plate... got another unit/2nd gen unit from costaletech. have a unit from g-net but not using it; won't let me change volume while it's unlocked...   jR Replies to this message: tomfatboy123 (Dec 30, 2008 1:25 pm) rsht (Nov 13, 2009 3:05 am)
#19 of 20 Re: HID Lights for 07' Denali [jjrho] by tomfatboy123 Dec 30, 2008 (1:25 pm)
Replying to: jjrho (Jan 04, 2007 11:05 pm) Hey guys does any one know how to remove a 2008 GMC Yukon XL headlights...? Tried contacting a local dealer but the wont help... I wanted to install my HID kit that I had receive for X-Mas.... Please help me.... Replies to this message: rsht (Nov 13, 2009 3:05 am)
#20 of 20 Re: HID Lights for 07' Denali [tomfatboy123] by rsht Nov 13, 2009 (3:05 am)
Replying to: tomfatboy123 (Dec 30, 2008 1:25 pm) A side from the two screws that you see from the top of each headlight unit/assembly, there is another screw hidden inside/behind the bumper where you can only get to by partially pull open the black plastic wheel-wall (need to first remove the 2-screws & 2-plastic anchors towards the front side of the wheel-wall). Once you have all three (3) headlight assembly screws removed, then you can skillfully angle the assembly out...   Just thought I ask, do you really want to take the whole headlight assembly out, or just want to replace the bulbs? If just to replace the bulbs, I found an easier way so you won't need to remove the whole assembly but only to remove a few plastic anchors off the splash shields (a soft tar material) directly behind the headlight unit. For the 07 Yukons, on the passenger side, this "shield" is right next to the Air filter housing; for the driver side, its right next to the windshield washer fluid tank. Yes, the access space is quite small (so be careful removing/installing the bulbs - not to drop them), but to me its a hack of a lot easier to get to the bulbs than the factory way and still end-up not able to angle the unit out of its mounting space...

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon '07 denali XL light bulb type?