- #10 of 19
-
Re: HID Lights for 07' Denali [jjrho]
by rsht
-
Dec 31, 2006 (6:03 am)
-
|
|
Replying to: jjrho (Dec 30, 2006 9:44 am)
Yeah, I felt the same way about the reverse, left them unchanged. As far as the Turn and Brake bulbs, they both use the same type. I didn't want to mess with adding the load balancer, so, I only replaced the rear Brake lights with LEDs. A Cheap way to go... The front Amber (L/R turn) bulbs above the H13s, I believe they are also the same type with the rear, with dual filaments.
BTW, I'm with ya about waiting for the whole assembly from ipcw.com, they look sharp! Thanks for mentioning it.
|
- #11 of 19
-
Re: HID Lights for 07' Denali [rsht]
by herbedout13
-
Jan 02, 2007 (7:13 pm)
-
|
|
Replying to: rsht (Dec 31, 2006 6:03 am)
Hey rsht, okay the site you mentioned about the hids, if I want to order them do I just get the h13 bulb with the 1200 kit, and what number bulb is to replace the rear brake lights? Did you pit hids on your tuck and if so which ones?
I only have my truck for one month so I'm still learning. Thanks for the info!!
|
- #12 of 19
-
Re: HID Lights for 07' Denali [herbedout13]
by rsht
-
Jan 03, 2007 (10:03 am)
-
|
|
Replying to: herbedout13 (Jan 02, 2007 7:13 pm)
As far as the HID light kit, I was only to point out a website that I have came across. I have not made any such conversion, nor plan to do so as I have tried something like that before with my other car. The result, although with a "whiter" light, the light pattern was not desirable to me. About the LED bulbs, per GM spec, 2007 GMC Yukon Denalis use the 7443s (NOT the 3157)... Sorry about my previous post, which mentioned the 3157 number.
|
- #13 of 19
-
Re: light issue for 07 denali [rsht]
by rsht
-
Jan 03, 2007 (10:15 am)
-
|
|
Replying to: rsht (Dec 30, 2006 4:16 am)
Readers, please note in my previous post, my reference to the 3157 type bulb for the 2007 GMC Yukon Denali is Incorrect. According to my dealership, its the 7443 type of Bulb.
|
- #14 of 19
-
Re: light issue for 07 denali [rsht]
by steve_ HOST
-
Jan 03, 2007 (10:53 am)
-
|
|
Replying to: rsht (Jan 03, 2007 10:15 am)
Just a fyi, but after posting, you may edit your post for 30 minutes.
|
- #15 of 19
-
Re: HID Lights for 07' Denali [jjrho]
by herbedout13
-
Jan 03, 2007 (11:48 am)
-
|
|
Replying to: jjrho (Dec 30, 2006 9:44 am)
Hey Jim did you do an after market conversion Hid kit to your new 07 denali? Just curious I want to but dont want to put the wrong type in. I'm trying to get the look like the new escalade.
Thanks
|
- #16 of 19
-
Re: HID Lights for 07' Denali [herbedout13]
by jjrho
-
Jan 03, 2007 (9:47 pm)
-
|
|
Replying to: herbedout13 (Jan 03, 2007 11:48 am)
well, i haven't yet but will. i just haven't decided on which h13-2 system to go with; some are H13-2 low with HID xenon, high with halogen and some are dual xenon while there's a bulb that is h13-1 element but with a reflector that moves to make it a high beam- which i'm not sure of....
most are chinese made, a few are european made and $400 for set..
i'm gonna get a 6000K temp bulb; it would be white but not too blue... escalade is probably about there...
it's interesting in that no one seems to have a simple plug/play set up yet.... i just want to be able to plug the harnesses w/o doing any soldering/wiring.... o/w, i have to have the H13 harness and plug the wires to low/high/gnd-common ,etc...
as for the rear bulbs, they sure look like typical 3157s...what's the difference btwn the two ?!?!?
maybe i will just wait another few months for the ipcw people to sell their new unit...o/w, anyone know if the escalade rear LED assembly can be placed into the denali body? although i bet the factory assembly would be quite expensive...
jim R
so calif
|
- #17 of 19
-
Re: HID Lights for 07' Denali [jjrho]
by herbedout13
-
Jan 04, 2007 (10:08 am)
-
|
|
Replying to: jjrho (Jan 03, 2007 9:47 pm)
Yea I agree,I want to change them but I don't want to have to deal with a whole wiring system. I thought that website that was mentioned before in another message was a plug and play system. Also how easy was it to install the GM lock pit?
Ron
|
- #18 of 19
-
Re: HID Lights for 07' Denali [herbedout13]
by jjrho
-
Jan 04, 2007 (11:05 pm)
-
|
|
Replying to: herbedout13 (Jan 04, 2007 10:08 am)
very easy..just hairy taking off the face plate...
got another unit/2nd gen unit from costaletech.
have a unit from g-net but not using it; won't let me change volume while it's unlocked...
jR
|
- #19 of 19
-
Re: HID Lights for 07' Denali [jjrho]
by tomfatboy123
-
Dec 30, 2008 (1:25 pm)
-
|
|
Replying to: jjrho (Jan 04, 2007 11:05 pm)
Hey guys does any one know how to remove a 2008 GMC Yukon XL headlights...? Tried contacting a local dealer but the wont help... I wanted to install my HID kit that I had receive for X-Mas.... Please help me.... 
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
