You are here: Forums Sedans Jaguar XJ-Series Jaguar XJ-Series Electrical Glitches

Jaguar XJ-Series Electrical Glitches

71 messages,  Last post on Nov 29, 2009 at 6:10 PM

You are in the Jaguar XJ-Series Forum. Your Hosts are pat & karens

What is this discussion about? Jaguar XJ-Series, Jaguar XJR, Sedan

Messages Page 8 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#68 of 71 Rear lamp module by jaguar13126 Aug 23, 2009 (12:31 pm)
I have an issue with the turn signal. The turn signal does not work when the brake is applied. I have replaced the rear lamp module with used part and the same thing still happens. I still get the lamp out warning in the driver information center. are there any fixes for this with updated modules? Any suggestions?
#69 of 71 Oil Pressure gage on 88 XJ6 by denny_88_xj6 Aug 24, 2009 (8:17 am)
I've only had the car for a few months, the oil pressure gage has never worked. It goes from 0 to MAX as it pleases. I suspect the sending unit is flakey. Does anyone know the specs on the sending unit, the resistance range it uses? These sending units are almost impossible to get and very expensive. I would like to try to adapt one from another car. If I can find one that works, I would be happy to share the info.
#70 of 71 Re: 2000 xj8, power window problems [realliferambo] by oldtataowner Nov 29, 2009 (6:08 pm)
Replying to: realliferambo (Mar 31, 2009 9:55 am) 1998 XJ8 driver's door window problem...window stayed up. Was told i needed a new module. Disconnecting the battery worked but only for about 6 window operations. Fixed everything by removing the door module, cleaning up the terminals with a soft brass brush and applying contact cleaner before re-assembling. Good luck,
#71 of 71 Re: 2000 xj8, power window problems [realliferambo] by oldtataowner Nov 29, 2009 (6:10 pm)
Replying to: realliferambo (Mar 31, 2009 9:55 am) 1998 XJ8 driver's door window problem...window stayed up. Was told I needed a new module. Disconnecting the battery worked but only for about 6 window operations. Fixed everything by removing the door module, cleaning up the terminals with a soft brass brush and applying contact cleaner before re-assembling. Good luck,

Messages Page 8 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Jaguar XJ-Series Jaguar XJ-Series Electrical Glitches