Sign In Join 



Toyota Camry Starting / Stalling Questions

94 messages,  Last post on Nov 07, 2009 at 11:18 PM

You are in the Toyota Camry Forum. Your Hosts are pat & karens

What is this discussion about? Toyota Camry, Engine, Sedan


Messages Page 5 of 10
1
2
3
4
5
6
7
8
...
10
Prev
Next
Last
Go To Msg #
Search This Discussion

#35 of 94
Re: How to change the ignition switch in a 2001 Camry [210delray] by handymanbob
Aug 16, 2007 (11:32 am)
Reply

Replying to: 210delray (Aug 16, 2007 8:13 am)

Dayummmmm it's 130.00 on ebay and the part is over 100, not sure a factory manual is a good idea for my pockets.
 
As far as Kiawah is concerned I wish I could wait. I am also out of state from home and am due back at home...900 miles away by next Thursday.
 
Thanks for the suggestions though
#36 of 94
Re: How to change the ignition switch in a 2001 Camry [handymanbob] by rsantan1
Aug 16, 2007 (12:01 pm)
Reply

Replying to: handymanbob (Aug 16, 2007 11:32 am)

I have Haynes manuals for both my toyota's. They are very good and have pictures. If you do not want to purchase one then go to the Library and make copies of the section you need.
#37 of 94
Re: How to change the ignition switch in a 2001 Camry [rsantan1] by handymanbob
Aug 16, 2007 (12:28 pm)
Reply

Replying to: rsantan1 (Aug 16, 2007 12:01 pm)

Do they contain detailed information about how to change an ignition switch? I am kinda stuck in a small town here so the library is tiny with no manuals at all. Came here to visit my parents grave and have to be home to be in court for a child custody hearing with my ex and back to work. Crappy time for all this to happen.
#38 of 94
Re: How to change the ignition switch in a 2001 Camry [rsantan1] by handymanbob
Aug 16, 2007 (3:23 pm)
Reply

Replying to: rsantan1 (Aug 16, 2007 12:01 pm)

RSANTAN----What year manuals do you have and do they cover changing an ignition switch at all?
#39 of 94
engiene problem by mollas
Aug 16, 2007 (2:22 pm)
Reply
my 1988 camry's engine (with 130K miles) goes off whenever I sopped (at a traffic light for example) in the first 25 to 30 minutes of driving. Once I drove it for 30 minutes or more, the problem disappears. This happens whenever there is rain before I start the car. Otherwise, it starts and runs very well in winter or summer.
 
what could be the problem? thanks, Mollas
#40 of 94
Re: engiene problem [mollas] by Mr_Shiftright HOST
Aug 17, 2007 (9:13 am)
Reply

Replying to: mollas (Aug 16, 2007 2:22 pm)

How about new ignition (spark plug) wires? Have you ever done that?
#41 of 94
02 Camry start problem in heat by pdnotes
Aug 20, 2007 (2:13 pm)
Reply
I have a 2002 Camry 4 cyl. and am having intermittent starting problems. My dad checked the battery and the starter, both are fine. When it happens, it will not even turn over - no click or anything. If you repeatedly turn the key (sometimes 30-40 times), it will start. We had the same problem with a Nissan several years ago, and an ignition switch solved it. Could this also be the issue with my Camry? Another strange note - this seems to only happen when it's hot outside.
#42 of 94
Re: How to change the ignition switch in a 2001 Camry [handymanbob] by kiawah
Aug 23, 2007 (12:05 pm)
Reply

Replying to: handymanbob (Aug 16, 2007 7:13 am)

I don't know if you still need the instructions, but I'm back in town and just sent them to your carspace email address. Check upper right hand corner...."you have mail".
#43 of 94
Re: How to change the ignition switch in a 2001 Camry [kiawah] by yez
Aug 29, 2007 (5:23 pm)
Reply

Replying to: kiawah (Aug 23, 2007 12:05 pm)

Please help. We have the same exact switch assembly problem and symptoms as stated in #41 (2002 Camry) and are trying to replace the switch. Can't get it out... Can you send directions?
 
Never mind...it took some doing, but we got the new switch assembly installed.
#44 of 94
Replaced Starter Now Toyota Camry will not start unless it is in Neutral by ace3queen
Nov 18, 2007 (10:18 am)
Reply
My husband recently replaced the starter in our 1992 Toyota Camry. He's taken it apart twice to make sure he put it together correctly. However, the car will not start unless he places it in the Neutral position. Before the starter went out, he could start it in drive. Can someone offer some insight to this problem. Thanks!

Messages Page 5 of 10
1
2
3
4
5
6
7
8
...
10
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement