You are here:
Forums
Sedans
Oldsmobile Intrigue
Oldsmobile Intrigue Transmission / Suspension Problems

109 messages, Last post on Oct 09, 2009 at 4:12 AM
You are in the Oldsmobile Intrigue Forum. Your Hosts are pat & karens
|
Replying to: tcarroll00 (Jul 13, 2009 11:28 am) Do you have any "check engine" lights on? If so, get the car scanned and post the codes. The front spark plugs are easy to change, the rear 3 are PITA. Others have reported needing an extended socket wrench. some have reported removing the engine mounts and "tilting" the engine to give more clearance. I took a quick look and saw this was too much for me to handle and had my mechanic replace my spark plugs. He commented they were tough to reach and the bill reflected as much. the spark plugs are 100k plugs. The 3.5L engine is derived from the 4.0L Northstar engine (also used in the Aurora). This engine burns oil. i was burning about a quart every 1500-2000 miles. There are many discussion about this on the internet. Most are too detailed for interests but no one has found a solution.
|
|
|
|
|
Replying to: dtownfb (Jul 13, 2009 12:33 pm) This is sheer ignorance talking, but would a transmission problem make a check engine light come on? Yeah, I was never too worried about the oil consumption after reading a few posts. I just had no idea if it was a design flaw. At the moment, I am thinking the worst, and if thats the case then I'll need a rebuild. I will get the car scanned asap, and Ill post the exact codes. Thank You.
|
|
|
Replying to: tcarroll00 (Jul 13, 2009 12:51 pm) here's a discussion on the P0742 code: http://townhall-talk.edmunds.com/direct/view/.f0fecb3/12 |
|
I own a 99 Intrigue that has recently reached 100,000mi. During the last month, the transmission started to shift roughly but only intermittently. It has since ran smoothly and I don't perceive any slippage. I went to a GM dealer who scanned the car and came out (after an hour) with the above codes. I was told the transmission needed to be opened for them to know exactly what repair was needed (at an expected cost of 800 $C). I visited another dealer who quickly said that all I needed was to replace the pressure control valve solenoid that is located on the side of the tranny. This is a 5 hour job that should solve the problem (expected cost of 800 $C). My usual mechanic also scanned the car, found the torque converter code. He concluded my transmission needed to be rebuilt at a cost of 1,700 $C. I also consulted with local tranny repair shops. You will not be surprised that they concluded to a full rebuilt. I am prepared to have the car repaired but I don't feel like rebuilding the tranny, if I don't have to, as I don't expect to keep the car for another 10 years. Could someone tell me if the Torque Converter Solenoid can be replaced without opening and dismantling the transmission or not ? I don't feel like spending 800 $C to replace a switch and then have to rebuild it a few months down the road. I have read the forum that goes back to 2005. Thanks to the contributors.
|
|
|
Replying to: zenfm (Sep 30, 2009 8:13 am) I would go with the dealer who suggested replacing the pressure control valve solenoid. This is a common problem with the Intrigue.
|
|
|
Replying to: dtownfb (Sep 30, 2009 4:55 pm)
|
|
|
Replying to: zenfm (Sep 30, 2009 5:09 pm) |
|
You are here:
Forums
Sedans
Oldsmobile Intrigue
Oldsmobile Intrigue Transmission / Suspension Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2002 Oldsmobile Intrigue



Browse by Board
Browse by Topic