Oldsmobile Intrigue Electrical / Lighting Problems

185 messages, Last post on Sep 01, 2009 at 5:59 PM

You are in the Oldsmobile Intrigue Forum. Your Hosts are pat & karens

What is this discussion about? Oldsmobile Intrigue, Lights, Electrical, Sedan

Outline

Messages Page 20 of 20: 1; ...; 14; 15; 16; 17; 18; 19; 20; Prev; Next; Last

#184 of 185 Re: Hardlight issue [01intrigue] by sandra85 Aug 31, 2009 (6:33 pm)
Replying to: 01intrigue (Feb 08, 2009 7:18 pm) I've checked the headlights, all the fuses and the battery. All are fine. when i turn the car on, and turn the turn signals on all the lights on the dash go off, and the car dies. Once i turn off the turn signal all the lights come back on, and i can then turn on the car again. and if i move the lever it makes a buzzing noise. I dont know if this helps, but i hope so. Replies to this message: indrgb (Sep 01, 2009 5:59 pm)
#185 of 185 Re: Hardlight issue [sandra85] by indrgb Sep 01, 2009 (5:59 pm)
Replying to: sandra85 (Aug 31, 2009 6:33 pm) Sounds like a short in the wiring for the mutifunction lever, although I have never heard of that before. I use to have an Impala that needed one of these due to non-functioning high beam lights. The dealer wanted $600 so I decided to live without high beams. DIY can be tricky on these multifunction levers.

#184 of 185: Re: Hardlight issue [01intrigue] by sandra85; Aug 31, 2009 (6:33 pm)

Replying to: 01intrigue (Feb 08, 2009 7:18 pm)

I've checked the headlights, all the fuses and the battery. All are fine. when i turn the car on, and turn the turn signals on all the lights on the dash go off, and the car dies. Once i turn off the turn signal all the lights come back on, and i can then turn on the car again. and if i move the lever it makes a buzzing noise. I dont know if this helps, but i hope so.

indrgb (Sep 01, 2009 5:59 pm)

#185 of 185: Re: Hardlight issue [sandra85] by indrgb; Sep 01, 2009 (5:59 pm)

Replying to: sandra85 (Aug 31, 2009 6:33 pm)

Sounds like a short in the wiring for the mutifunction lever, although I have never heard of that before. I use to have an Impala that needed one of these due to non-functioning high beam lights. The dealer wanted $600 so I decided to live without high beams. DIY can be tricky on these multifunction levers.