Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Ford Crown Victoria/Mercury Grand Marquis Ford Crown Victoria/Mercury Grand Marquis General Maintenance
102 messages, Last post on Oct 10, 2009 at 5:59 PM
You are in the Ford Crown Victoria/Mercury Grand Marquis Forum. Your Hosts are pat & karens
|
Replying to: maytag87 (Aug 25, 2008 3:34 pm) Still working on this 92 MGM oil pan swap. Motor mount bolts were 13 mm and we used a flex socket to get to them. We have the motor up on wood blocks over the motor mounts and the trans jacked up a bit. The oil plan is detached but we cannot extract it as the bell housing of the trans is in the way. We would like to avoid removing the trans. Should we pull the oil pan out the front? We may be able to get the motor a touch higher if we remove the wiper motor, but we dont think it will buy us enough clearance. Is this a neccessary step? Any more tips? Thanks! Rob |
|
|
What are the best spark plugs to put in my 2004 P-71 Crown victoria Cop Car ??? It has 126 thousand on it,,Runs like a top but I don't know if they have ever been replaced??? Winter is coming so I would like to get them replaced as soon as possible... |
|
|
|
|
Replying to: mentecki (Oct 20, 2008 7:45 pm) gap is 1.32-1.42 mm (0.052-0.056 in)
|
|
|
Replying to: mentecki (Oct 20, 2008 7:45 pm)
|
|
|
Replying to: euphonium (Oct 21, 2008 9:01 am) I just bought it and I don't know if I should Tune it up before winter. can I do it my self, I have tools to do the job. Thanks Sam,
|
|
|
Replying to: cobrass (Oct 22, 2008 6:10 pm) The seller probably did the necessary to have it run very well so as to market it. |
|
|
Replying to: Mr_Shiftright (Oct 21, 2008 8:53 am)
|
|
|
|
|
Replying to: martykyj (Nov 27, 2008 4:26 am)
|
|
|
Replying to: Mr_Shiftright (Nov 27, 2008 10:56 am)
|
|
|
|
|
Replying to: martykyj (Nov 27, 2008 7:05 pm) Motorcraft shows a variety of plugs for that engine actually, depending on what type you want and also depending on something called a "W engine code" which I don't know about. For that code they list a very similar number to the one from Alldata---AGSF32PM SP493 seems to be a platinum plug for the Non W code engines. Ford changes their plug numbers so often that by the time he reads this, there will be a new # 
|
|
You are here:
Forums
Sedans Ford Crown Victoria/Mercury Grand Marquis Ford Crown Victoria/Mercury Grand Marquis General Maintenance
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Ford Crown Victoria
2010 Mercury Grand Marquis
Browse by Board
Browse by Topic
