33 messages,
Last post on May 26, 2009 at 5:37 PM
You are in the
Ford Crown Victoria/Mercury Grand Marquis Forum.
What is this discussion about?
Ford Crown Victoria, Mercury Grand Marquis, Audio, Sedan
#26 of 33 Re: Radio reception [jnt]
by ionosphere1
Nov 16, 2007 (8:38 pm)
Thanks for the reply. My existing 2000 Neon has a whip antenna, but the new Grand Marquis I am getting does not.
Dec 05, 2007 (10:16 pm)
I'm buying a 2008 Grand Marquis LS, but the one I test drove did not have the audiophile unit, so I have never heard it. I ordered a car with that option. Does anyone have that stereo and is it good? Sound quality is very important to me and was unhappy that the only model the dealer had did not have that option for me to hear.
#28 of 33 Re: Amp wiring [ttlpwnge721]
by cdoc1
Apr 05, 2008 (7:33 pm)
in a car or truck, its allways best to run your power cables as high as possible in the engine compartment. go thru the firewall at the best place you will be able to have acces. Please use grommets, I have seen two carrs burn to the ground because of this. 400 to 800 watts i suggest 4 guage wire 800 to 1200 i suggest 00 guage, with caps the amp draw can reach 120 amps under load. the wire and support for big amps is A major factor in planning for a system but well worth it in the future.
#29 of 33 Re: 2003 Grand Marquis Radio Reception [sal06]
by dcahill
May 22, 2009 (6:45 am)
the radio on my 2003 grand marquis works on cd and tape but keeps scaning
on am/fm1 and fm2 i hear volume but no reception
#30 of 33 Re: 2003 Grand Marquis Radio Reception [dcahill]
by dcahill
May 22, 2009 (6:47 am)
#31 of 33 2003 Mercury Grand Marquis
by ibtom
May 26, 2009 (5:06 pm)
#33 of 33 2003 Grand Marquis radio removal...
by ibtom
May 26, 2009 (5:37 pm)
I have a 2003 Grand Marquis LS and my radio just stopped working... I checked the fuse under the dash and also under the hood audio fuse. Both are OK. Is there another fuse on the radio itself? I looked at the dash and truthfully cannot figure out how to take the radio out to check... HELP!!!