Last post on Mar 25, 2013 at 6:34 PM
You are in the Ford Crown Victoria/Mercury Grand Marquis
What is this discussion about?
Ford Crown Victoria, Mercury Grand Marquis, Lights, Electrical, Sedan
#228 of 245 Re: Module [roltyd22]
by Mr_Shiftright HOST
Jan 26, 2013 (3:10 pm)
sounds like the switch overheated. I'd replace it unless it was punishingly expensive.
"Fire...good. Fire in car....BAD!"
sorry about the DLC...that's what the manual told me when I looked it up for you. In the diagram it looks to be more to the right (passenger) side of the radiator shroud, next to the outside temp sensor. This is a '94 GMarquis, right?
#229 of 245 Re: Module [Mr_Shiftright]
Jan 26, 2013 (5:56 pm)
Your right about the fire,Hey i went to orielly's and got another harness,put it on and seems fine now lights not flashing.I'll just keep an eye out and see what happens now,thanks' for the help i appreciate it.
#230 of 245 Re: Module [roltyd22]
by Mr_Shiftright HOST
Jan 26, 2013 (6:17 pm)
Great! If you can, maybe feel the harness to see if it's getting hot.
#231 of 245 Re: Module [Mr_Shiftright]
Jan 26, 2013 (7:31 pm)
Yes i did so far so good..i'll keep you informed on it...now i can sleep tonight..thanks again
#232 of 245 Re: Lights [roltyd22]
Feb 07, 2013 (8:27 am)
Yes, it has an LCM. The part is ~ $500.00 from Ford and they will install it for another $400.00. If you are handy and know how to solder, this problem can be fixed by replacing a relay on the LCM circuit board. The relay is available on line for ~ $0.85 + ~ $3.00 shipping from Mouser Electronics.
Somewhere on this string are pictures of where the LCM is located (under the dash to the right of the steering wheel) and the part # of the relay.
#233 of 245 Re: Lights [ct45]
Feb 07, 2013 (9:09 am)
Actually this was in reference to 2000 - 2006 Merc. Gran Marquis. Not sure about the '94.
#234 of 245 Wiper Control Module
Feb 18, 2013 (7:54 pm)
HI, I posted in here before about my 94 Grand Marquis about my lights going on and off.Well i'm back darn it,They 're doing same thing i replaced a burnt harness on my light switch,it worked for a bit.Come's to find out mine has a Wiper Control Module where the LCM is now i think.It was clicking i thought it was an LCM.So i'm wondering does it have anything to do with the lights?..I can turn on my wipers with the Multi switch and it will start clicking real bad..I did not replace the light switch itself just the harness...The wiper Control Module has relays in it like the LCM does.
Feb 18, 2013 (11:54 pm)
In reference to question #234,does this sound like a headlight switch wiring problem?.
Feb 19, 2013 (2:01 pm)
My 94 Marquis headlight switch harness is 9 prong,when i replaced it i had to remove 2 wires from it because the burnt one had only 7 wires.Is that the right harness that was on the car to begin with or does it need a 7 prong harness>?....i'm having light problems the one i replaced had a burnt wire.
#237 of 245 autolamp relay
Feb 19, 2013 (9:50 pm)
I found the problem with my lights,it was the autoheadlamp relay.It was mounted just to the right of the wiper control module and come to find out it was clicking when the lights flickered on and off.So I unplugged it and problem solved..no auto lights but who cares..,,,this is on my 94 Grand Marquis GS ..