Acura Integra Transmission Problems

hey i just recently bought a 96 integra for 2000. The only problem with it was i needed to replace the cv boot or the drive shaft.So on the way home after buying it, after doing highway for a good 15 minutes. Im on my street corner, doing about 3-4MPH. All i hear is a big noise followed by cluck-cluck-cluck. So i put it to the curb. Pushed it a few houses down to my place. I realize that ill have to replace the front passenger side drive shaft. This i hear is a medium job. But is there any kind of other serious damage that could of been done? Im a student and i dont have 500-1000 to put into it. Mine is manual btw. Please answers would be very helpfull

#47 of 53 should be OK but check by car_love

Apr 07, 2010 (12:57 pm)

you should be fine, the only thing it did was probably ruin the CV boot and such. You can see if there's any damage to where the front axles go into the transmission to see if anything stripped but you should be fine I think. Check inner side of wheel. I owned my 98 for 10 years and watched knew people who broke front axles and replaced them all the time. The honda/acura ones are the best and cheapest too.

#48 of 53 Re: major 95 gsr manual problems. help!!!! [acuradude2] by imakz

Dec 15, 2011 (7:33 pm)

Replying to: acuradude2 (May 11, 2010 5:51 pm)

i drove over speed bump. nd like scraped. nd now when i put it in gear the stick starts moving crazy. in every single gear. nd like i could move my stick shift up nd down. its not secure. you know whut the problem is???

#49 of 53 Re: Automatic Transmission Problems [toolmantim] by tbahr

Feb 26, 2012 (1:58 am)

Replying to: toolmantim (Aug 24, 2010 5:38 pm)

still nobody can seem to help me, I think next I am going to try and change the modulator.

#50 of 53 91 Acura Integra transmission problem by tbahr

Feb 26, 2012 (2:47 am)

Replying to: rickeym3 (Apr 21, 2011 6:12 pm)

91 Integra will not shift until fully warmed up,have changed almost all the sensors the TCM and the ECM and even the thermostat. at least I dont have any more codes so next i think I am going the change the modulator the speed pulser and the VSS i cant think of anything else can you?

Please help if you can
I only paid $250.00 for the car and now have over $1500.00 in it with new axsels and all new brakes and stereo and all the parts i have put in for no reson i guess

#51 of 53 Re: Automatic Transmission Problems [rickeym3] by toolmantim

Dec 20, 2012 (2:18 am)

Replying to: rickeym3 (Apr 21, 2011 6:12 pm)

I still can'i figure this one out have you?

#52 of 53 90 integra rs auto transmission by dj_thao

Feb 25, 2013 (8:51 pm)

I have a 3 door 90 integra rs auto tansmission.. The car died on me.. And i dont know why the s3 wont stop flashing. I cant start the car... It cranks and all.. But it wont fire... Please help any info plz email me at sion_thao85

yahoo.com

Replies to this message:

x6h0ztx (Apr 26, 2013 4:17 am)

#53 of 53 Tranny problem fixes ! by x6h0ztx

Apr 26, 2013 (4:17 am)

Replying to: dj_thao (Feb 25, 2013 8:51 pm)

http://www.youtube.com/watch?v=h7JJ_g2UuBI clutch test

http://www.youtube.com/watch?v=I4CUBB01qX8 cable adjust

http://www.youtube.com/watch?v=FfjGohWy-OU how it works

I have the same problem, I have it in gear and no movement.... but im going to start with the cheapest thing... adjusting the cable. then fluids, then well... if ima get a new tranny, gonna get a new clutch. Thats my opinion.

My car on the dyno: http://www.youtube.com/watch?v=xEtF0T1u--o&list=UU60kapmvh9A83EGKzcEfwaw&index=2-

« Previous
1
2
3
4
5
6
Next »
Last

To POST a message, please Sign In.

Forum Tools

Search Forums

Enter Keyword(s):

Browse by Category

Browse by Vehicle

Browse by Board

Browse by Topic

View All Topics

Learn More, Do More

Edmunds Community

Explore Edmunds