Last post on Nov 06, 2011 at 9:01 AM
You are in the Dodge Charger
What is this discussion about?
Dodge Charger, Dodge Charger SRT-8, Tires, Wheels, Sedan
#10 of 11 Re: Lug Wrench [two4]
Oct 18, 2010 (9:55 am)
Check your lug wrenches.....Just heard from Dodge about my Lug Wrench that doesn't fit my lugs. "Bill" at Dodge would have to decline my need for a lug wrench at this time. Dodge is unable to help me.. Well I am now UNABLE to ever buy a Dodge again. They couldn't supply me with a fan motor when my car overheated, but they were able to charge me $600 for a new rim. Now I can't get a Lug Wrench from them. Amazing... I've had a '74 Charger, a '76 Charger and this '06 will be my last Dodge.
#11 of 11 Re: Lug Wrench [two4]
Nov 06, 2011 (9:01 am)
Just an FYI, the lug wrench is not the wrong size, the problem is Dodge creates a 2 piece Lug Nut which as soon as you put the lug wrench on the top piece tends to blow out, either expanding(so it won't fit in the lug wrench) or completly stripping so the top piece seems too small and it will just spin, your best bet is to buy an after-market lug wrench that has the 4 different size openings to get the lugs off and replace them with an aftermarket lug(check CAP if there is one near you, they carry a size that will fit the 18in rims, if that's what you have on it and isn't a 2 part lug) This is a common problem with ALL Dodge vehicles, other than that problem I have had no other problems with my 2006 SXT Charger.