Sign In Join 



Chrysler Town & Country/Dodge Caravan Door & Window Problems

220 messages,  Last post on Oct 16, 2009 at 8:01 AM

You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens

What is this discussion about? Chrysler Town and Country, Dodge Caravan, Exterior, Van


Messages Page 22 of 22
1
...
16
17
18
19
20
21
22
Prev
Next
Last
Go To Msg #
Search This Discussion

#211 of 220
Re: Noise at cold start up [lotempio] by tportertexas
Aug 28, 2009 (10:05 am)
Reply

Replying to: lotempio (Jun 17, 2009 5:21 pm)

Hi Frank, I just noticed your post. No they never fixed it.. I basically hear they never hear the noise when it is in the shop. I recorded it and when I get time I will take it back in to get checked again and make them listen to the recording. Good luck and read on there are some other posts with same issues.
Thanks
#212 of 220
Re: Noise at cold start up [tportertexas] by lotempio
Sep 08, 2009 (6:19 pm)
Reply

Replying to: tportertexas (Aug 28, 2009 10:05 am)

After 5 tries, its fixed. They replaced the cat converter and muffler. They actually called"Chyrsler" because they could not find problem. I can not tell you how happy I am.
#213 of 220
01 T&C power door opens, but won't close by want2learn
Sep 09, 2009 (12:54 pm)
Reply
Power door opens fine with button, but when it is fully open, the motor keeps running like it's trying to open it further. It will try this for a minute or so, unless I manually pull on the door handle to make it stop. Then it will not close by pressing the power button and I have to manually close it every time. Any advice would be greatly appreciated. Thanks!
#214 of 220
Re: 01 T&C power door opens, but won't close [want2learn] by erols
Sep 09, 2009 (1:49 pm)
Reply

Replying to: want2learn (Sep 09, 2009 12:54 pm)

Similar problem, but the door stops when open. When I hit the button again to close, it tries to open some more and stops. Have to close manually every time. It's like it does not recognize that it is already fully open.
Let me know if you figure it out!
#215 of 220
Re: Noise at cold start up [lotempio] by tportertexas
Sep 09, 2009 (9:23 pm)
Reply

Replying to: lotempio (Sep 08, 2009 6:19 pm)

OMG! That is great news! I am calling my dealership first thing in the morning! Maybe i'll keep it after all..
#216 of 220
2006 T & C passenger sliding door lock problem by herbie87
Oct 14, 2009 (4:58 pm)
Reply
I have a 2006 T & C that I am having problems with the lock on. When I try to use the console remote or key remote, it doesn't fully unlock, only 1/2 or so. It does unlock manually and when unlocked, console, key, door buttons and manual opening occurs. I've taken the panel partially off and sprayed WD-40 thinking it was gummed up but to no avail. Any suggestions? I have no problems with any of the other doors or liftgate.
#217 of 220
Re: 2006 T & C passenger sliding door lock problem [herbie87] by basline11
Oct 15, 2009 (4:34 am)
Reply

Replying to: herbie87 (Oct 14, 2009 4:58 pm)

There is probably a broken wire that runs in the plastic chain channel along the bottom of door. I had the same issue in my '05 T&C. You need to remove the wire harness from the bottom of the door and look for a broken wire. Good luck.
Base ---
#218 of 220
Door lock fix by mendyusa
Oct 16, 2009 (6:21 am)
Reply
05 Town and Country Ltd doors do not lock or unlock using switchs on doors or key fob. Alarm beeps however. Cleaned posts on fuse 10D with pencil eraser and re-inserted. Problem fixed. Fuse 10D is hard to find as it is not included in the diagram on the fuse boxes inside cover. Look for it in the lower left quadrant of the box as your leaning over the fender. It is labeled by the fuse. Black 10D on black plastic look real close.
#219 of 220
Re: Door lock fix [mendyusa] by basline11
Oct 16, 2009 (7:12 am)
Reply

Replying to: mendyusa (Oct 16, 2009 6:21 am)

That could have been the problem but chances are slim. Disconnecting the negative battery cable for about 30 minutes will do the same thing. There is a flash update for the BCM that will FIX the problem but I've only seen it mentioned once and it wasn't at the time I was having the issue. I've called several dealers and they all treated me like I was speaking martian. Every single one of them said I would need to bring the car in so they could "check it out." Keep looking for a bulletin # to flash the BCM so your remote and power features don't keep disapearing. In the mean time, yanking the fuse or disconnecting the battery will be the short term fix on the T&C.
#220 of 220
Re: Door lock fix [mendyusa] by wolf70
Oct 16, 2009 (8:01 am)
Reply

Replying to: mendyusa (Oct 16, 2009 6:21 am)

I tried the same thing pulled the fuse and replaced it FIXed Thanks Do you have any updates to this problem? Bob

Messages Page 22 of 22
1
...
16
17
18
19
20
21
22
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement