Isuzu Rodeo high idle problems

8 messages, Last post on Dec 09, 2008 at 5:05 PM

You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester

What is this discussion about? Isuzu, Isuzu Rodeo Sport, Auto Repair, SUV

#6 of 8 Re: 1991 rodeo high idle issues [mbents] by kf4cln Mar 25, 2008 (7:02 pm)
Replying to: mbents (Apr 26, 2007 1:53 pm) It works............ I have a 93 rodeo and the ecm fuse trick works. My Rodeo would rev to 2500 rpm when the clutch was pressed, sounded like John Force staging at the Gator nationals ! Thanks
#7 of 8 Re: 1991 rodeo high idle issues [mbents] by isuzu94 Mar 29, 2008 (10:29 am)
Replying to: mbents (Apr 26, 2007 1:53 pm) Thanks very much for this answer. I just tried it on my '94 Rodeo, and it worked like a charm. After weeks of tracking vacuum hoses and checking connections without finding any solution, it's finally now not zooming up to 3,000 RPM every time it idles. The only slight difference is that when I tried to start it without the ECM fuse in place, it wouldn't. So, I just cranked it a few seconds and stopped. Then put the fuse back in place and followed the rest of the directions. Bingo! Test drive proved no more problem. Thanks, Thanks.
#8 of 8 rodeo idling high by ozziwi Dec 09, 2008 (5:05 pm)
hi there im new here - so bare with me i have a 1991 4 cylinder 2.6 rodeo and i have been in here reading up on the high idling issues ... mine is idlying at around 1200-1500rpm and cant seem to find where to knock the idling speed down, there is one by the throttle cable/arm adjusted that --made no difference -- any ideas would be greatly appreciated Cheers Kev - ozziwi Brisbane Australia