You are here: Forums Coupes & Convertibles Nissan 300ZX Nissan 300ZX Transmission Problems

Nissan 300ZX Transmission Problems

40 messages,  Last post on Aug 08, 2009 at 12:52 PM

You are in the Nissan 300ZX Forum. Your Host is claires

What is this discussion about? Nissan 300ZX, Transmission, Coupe, Convertible

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#22 of 40 Re: Clucht problems [prezxz] by 95convertna Mar 24, 2008 (11:53 am)
Replying to: prezxz (Oct 28, 2006 7:43 am) you might be experiencing the traction control kicking in, mine did the same thing until i took the fuse for the traction control out, it still stops fine and corners with no slippage, it will however shoot an abs code on the dash. do you hear a kind of rattling, it sounds like a rattle snake coming from the passenger side behind the seat when you try to launch, if so thats the trac control
#23 of 40 Re: fuel sending unit [battosai15] by 95convertna Mar 24, 2008 (11:55 am)
Replying to: battosai15 (Mar 11, 2008 11:24 am) you could try Z1MOTORSPORTS.COM, although i think they specialize in z32
#24 of 40 Gears are hard to go in. by alfie3 Apr 25, 2008 (3:45 pm)
Hi guys. I just replaced the clutch on my 95 300z, but now the gears won't go in smoothly, I have to push really hard to put it in gear. When I drive, sometimes the gear will slip back to neutral. Also when I press the clutch, it feels spongy. I don't know what it could be the problem, and it wasn't doing it before I chaged the clutch. Can anyone help me out with this? Thanks. Replies to this message: cossiemodo2000 (Dec 30, 2008 12:20 pm)
#25 of 40 Re: transmission just gave out [300problems] by peabody3 Sep 17, 2008 (5:40 am)
Replying to: 300problems (Mar 30, 2007 8:04 pm) I am having the same problem with my 94 TT. You had one responce that you should check the relays. where you able to fix your problem and if so, could you explain what you did. I am having a hard time finding the relays that where mentioned as a possible cause. I would really appreciate some help. Thanks Replies to this message: 300zxryder (Jul 22, 2009 12:59 am)
#26 of 40 slippage issues-93 300zx by jtrombone Oct 15, 2008 (6:01 pm)
Hey folks-have had my car for 7 years and it now has 115k on it, just did the timing belt 2k ago. The engine runs strong-it pulls great in 1st and 2nd gears. Sometimes in 3rd/4th/5th the tranny slips? RPM s go up, but there is a lag in acceleration. The clutch resevoir is at the mid point. Any ideas? Thanks JF   PS-3rd gear has bean balky since I owned the car. Replies to this message: missmarilyn (Oct 18, 2008 5:58 am)
#27 of 40 Re: slippage issues-93 300zx [jtrombone] by missmarilyn Oct 18, 2008 (5:58 am)
Replying to: jtrombone (Oct 15, 2008 6:01 pm) These are classic clutch slip symptoms. There is a possibility that you may be able to adjust the linkage (attached to peddle) to take up the play in the clutch. With 115k it is likely though that the Clutch (clutch, pressure plate, and bearing) will need replacement. If the CVs haven’t been changed yet, this may be a good time for those as well since they need to come off the transmission to access the clutch. Parts for this job will run less than $500, including CVs, and there’s a good guide on: link title. If you take it to someone, I’d expect to pay at least $2500.   Good luck
#28 of 40 LOSS OF POWER by theboythunder Oct 26, 2008 (4:11 am)
I HAVE A 93 300ZX WHEN DRIVING SOMETIMES NOT ALL THE CAR SEEMS TO LOSE POWER BUT AS I LET OFF THE GAS IT COMES BACK THEN TRANSMISSION STARTS SHIFTING FUNNY BUT IT CLEARS UP AFTER I RESTART THE CAR IT COMES AND GOES ANY IDEA? I HAD THE CAR CHECKED FOR A BAD CATALIC CONVERTER NO PROBLEMS THERE.
#29 of 40 Re: transmission just gave out [300problems] by xfarsidex Nov 03, 2008 (7:10 pm)
Replying to: 300problems (Mar 30, 2007 8:04 pm) Dude, the same thing happened to me yesterday. I was going to work and all of a sudden I herd a odd sound like high pitch spinning sound I guess, then *boop* she just started rolling no power and more. Its like I was driving in neutral, the engine was revving but it nothing to the wheels. Smell your trany fluid, mine smelled burnt, but it was clean looking and was at the level it should be. But if any one has any solutions plz let us know.
#30 of 40 Help! '84 300zx clutch master cylinder by hotice3DJO Dec 11, 2008 (11:05 pm)
I just bought a '84 300zx, but it needs a new clutch master cylinder. Can anyone provide a link to a 'how to" for doing this.

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Coupes & Convertibles Nissan 300ZX Nissan 300ZX Transmission Problems