Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Coupes & Convertibles Nissan 300ZX Nissan 300ZX Transmission Problems
40 messages, Last post on Aug 08, 2009 at 12:52 PM
You are in the Nissan 300ZX Forum. Your Host is claires
| For the past year i have been having problems with my 1991 300zx twin turbo , i have been experiencing the clutch slipping , i have replace the clutch , clutch master cylinder , slave cylinder , the clutch spring , slave cylinder hose and keeps doing it . The car runs but if you give enough power the clutch will not release and starts to burn( you can sense the clutch burning). There is a clutch power booster under the dash board , before i take the time to change this i will like to know if anyone has experience this problem. I've been having this problem after i had someone to replace my clutch, then i order from japan a 350z 2005 transmission made for me and i installed the 350z 2005 6 speed transmission in my 1991 300zx twin turbo and keeps doing the same problem. I have notice that with the original transmission and the new transmission the car keeps doing the same thing. If anyone knows whats wrong please let me know. Or if someone knows any speed shop in los angeles california area , please let me know i want to get my car fixed. Email me or respond. Thank you | |
|
|
|
Replying to: prezxz (Oct 28, 2006 7:43 am)
|
|
|
Replying to: emmitlruffin (Dec 29, 2006 3:46 pm) thank you
|
|
|
Replying to: prezxz (Dec 29, 2006 9:14 pm) Thanks, Mike |
|
| IS SWAPING FROM AN AUTO TRANS TO A MANUAL COSTLY AND HARD OR IS IT PRETTY EASY | |
|
Replying to: prezxz (Oct 28, 2006 7:43 am) i'm hoping you can help me out i have a 91 tt z and i am wanting to do the same up-grade as you did with the 05 350z transmission . i could use your help with what i need to get and do such as > did you use the same 300zx computer for the transmission and harness or did you have to get the 350z computer/ harness . is the transmission a direct bolt on would i use the 350 clutch fly-wheel and so on or would the one on the 300zx work . if it is not too much would you send a list of parts that i will need to get from the 350z to do the swap . thank u Marty |
|
|
|
|
- Eng/Tranny makes Clunking Noise when in "P" or "N", noise goes away in any drive Gear or Rev...sounds like the e Torque Converter is Knocking, maybe loose bolts, but no access w/o removing the starter, Tranny Support Brackets, Tranny Bolts and Tranny cover-plate. I also think the Fluid is reading "HIGH" when checked Cold & Hot. - Car was running Fine other than occasional Chunking in "P" & "N", but now the car will only drive for about 1-2 blocks then the RPMs Spin-out...High. So, I shut the Engine Off, wait 20-40 sec's and I can drive for another few blocks - Please advise actions to take before I Drop the Tranny. Found a Used Tranny  ATTARCO for $425, I can do the Labor - NOTE: bought with a SALVAGE Title in CA, was hit in the Drivers front-corner & repaired. Previously One Owner with 215,000 miles. The rest of the car seems CLEAN...Thank you, Brad |
|
|
|
| hey i got a problem with my '94 300zx(AT) transmission. it was working fine when i bought it about 3 months ago, then after driving it for about a month and a half the tranny just whent out. the odd part was that it didnt give any signs of goin out at all, i was just driving one night and it quit going into gear. ive talked to a couple friends about it and had all sorts of different answers, but nothing that i can really work with. the weirdest thing with it is that right when i start it up, it will go into gear, but only for a 100 feet or so, then gives out and wont go anywhere, but it's ONLY right when i start it up thats it. anyone had this problem or think they may have an idea? | |
| I have a 1990 300zx with 100K that i purchased about a year ago, i have had the engine replaced, body work done, repainted and now i am working on the interior, question is when i purchased the car the transmission made funny noise in 2nd and 4th, so i had the transmission replaced, i found a TT 5 speed transmission with low miles and had it installed, works great but guess what the noise is still there but not nearly as bad..... any ideas????? or experience with similar issues????? | |
You are here:
Forums
Coupes & Convertibles Nissan 300ZX Nissan 300ZX Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
1996 Nissan 300ZX
Browse by Board
Browse by Topic
Today's Chats
