Ask the Car People.SM


Ford Windstar Electrical Problems

334 messages,  Last post on Apr 26, 2013 at 6:05 PM

You are in the Ford Windstar Forum.

What is this discussion about? Ford Windstar, Ford Windstar Cargo, Van

Messages Page 20 of 34

#190 of 334 Re: electrical malfunction on 2002 ford windstar [hlotz] by justinswyfe

Apr 23, 2010 (7:49 pm)

Replying to: hlotz (Apr 23, 2010 9:05 am)
that is absolutely ridiculous! you could buy the dang diagnostic reader and do it yourself for cheaper probably. Try checking the computer that is located in the trunk of the van where the jack is located, on the side compartment. it controls a whole but load of stuff. i had to replace mine, got one for 80 bones at a junk yard. dealers didn't know what the problem was but my hubby figured it out on his own and the Lord's direction. Thank the Good Lord! I am sure the dealer would have charged us an arm and leg and possibly or first born!

#191 of 334 Engine shutdown, electrical failure while driving by wardenmark209

Apr 26, 2010 (1:50 pm)

99 Windstar LE- Has taken to temporarily shutting off while driving, tack goes to 0- instruments fluctuate- engine refires, then after several seconds, tach comes back to life- and we go on down the road. Like everone else have had all sorts of electrical issues- some solved -some not- but this one is dangerious.
HELP!

#192 of 334 Electrical problems by davisalo

Apr 28, 2010 (4:33 pm)

Help!! I have a 2003 ford windstar luxury edition with every electrical gadget you can think of. There seems to be too much amps coming in to the wiring system and it blows up some things. Example: when we put the ignition on and try to put headlights on or on AUTO, lights flash everywhere (radio too). We have a pop-up tent to hitch at the back but the tailgate lights don't work. We have been to the dealer, he put in 2-3 hours of work but couldn't find the problem.
 
HELP PLEASE!! Thanks

#193 of 334 Ford Windstar wont star when cab hot by john458

Jun 17, 2010 (3:39 pm)

I have a good one. Any time the cab gets over 100 degrees. (vehical left out in the sun with the windows shut). The van will not crank. Leave the doors open for a while, then it starts. New battery ,starter checks out. can anyone shed a light on the problem

#194 of 334 Re: Electrical problems [davisalo] by jmeadse

Jun 23, 2010 (8:56 am)

Replying to: davisalo (Apr 28, 2010 4:33 pm)
Hello, I am having similar issues. Did you get that figured out? Also on mine the passenger headlight won't work.

#195 of 334 98 Windstar window dilemma by isew4plsre

Jun 29, 2010 (9:03 pm)

My passenger window will not work. I removed the door panel and removed the motor, hit the switch and the motor works fine. Replaced the motor and window worked fine for 1 day. Removed door panel again and was mad so I hit the end of the motor with screw driver and it worked for a little while and quit again. The motor seems fine, what could be the problem?

#197 of 334 2001 Windstar electrical Craziness by fpumathguy

Jul 17, 2010 (11:23 am)

Ok so last night I take the family to see a movie. We come out and the battery is dead. I get a jump, get the van home, and replace the battery today. As soon as I connect the battery every single light on the van lights up. I mean every warning light, headlight, taillight, dome light everything and that is with no key in the ignition let alone turned on. Now I know why my battery went dead. Of course it is Saturday and no mechanic is working. Anybody have any thoughts?
justinswyfe do you know what the name of that computer in the back of the van is? If I knew what it was called I could look for the part better. Maybe that is my problem too.

#199 of 334 Instrument cluster goes crazy by johnw99

Aug 16, 2010 (11:08 am)

My 2003 Windstar has an intermittent instrument cluster problem. Intermittently, when the engine is started, the tach, speedometer, temp, and fuel gauge needles go crazy, jumping up and down. This typically lasts for 10 - 15 seconds. Afterwards, everything works just fine. I have pulled the instrument cluster assy and checked the connectors and contacts for any indication of corrosion or other issues, but found nothing. Getting ready to replace cluster assembly if no other solution is found.

Messages Page 20 of 34

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement