Sign In Join 



Ford Windstar Transmission

123 messages,  Last post on Nov 21, 2009 at 1:37 PM

You are in the Ford Windstar Forum. Your Host is Karens

What is this discussion about? Ford Windstar, Ford Windstar Cargo, Van


Messages Page 13 of 13
1
...
7
8
9
10
11
12
13
Prev
Next
Last
Go To Msg #
Search This Discussion

#119 of 123
2003 Windstar tranny failure - 2nd time by inkitup
Aug 29, 2009 (6:23 pm)
Reply
This happened 1 1/2 years earlier and had it fixed at AAMCO for $2400. I was in stop and go traffic when all of a sudden my RPM shot way up and and I had no drive. I pulled over only to find out I only had park and permanent neutral. They said I needed an new torque converter, new pressure control sensor, new assy. Kit, filter - 2nd design, and new overdrive band.
 
Well, at 1:30pm today I was returning home and was turning a corner, at 5mph, when all of a sudden my RPM shot way up and I had no drive. There was no noise associated with this at all. I coasted off to the side only to find out I had no R,D,1,2 and only park and permanent neutral again.
 
If the work was done, could any of this actually have fixed the issue I'm having?
 
Now, I'm wondering if this all was even necessary or if they even did the work? I have been reading about this problem all over the net and it seems to be a big problem with this model. I have read it could be the TRS, a mis-programmed PCM or even the VSS.
 
Does anyone have a possible solution? Or, has anyone had this same problem and have it fixed properly? And if so, what was done to solve it?
 
Fred
#120 of 123
Re: 2000 Windstar blew transmission fluid everywhere! [mswatson27] by robertsin1
Sep 27, 2009 (1:59 pm)
Reply

Replying to: mswatson27 (Aug 03, 2009 6:36 pm)

seal it, sell it and buy a honda.
#121 of 123
Windstar Transmission by mustangracer09
Oct 24, 2009 (7:52 pm)
Reply
I have a 1996 windstar with the 3.8 v6. About a year ago the trans went i did not have R D 2 1. About 6 month ago we found a van same year with rebult trans. put that in and a week after it started hanging in second gear. the van sit untill 3 weeks ago when we put in a new computer. Van ran great untill about 3 days ago then after running awhile its starts to hang in second again. it was doing this when it had the other trans in it before it went. i just replaced the speed sensor on the back of the trans yesterday and now it will shift but very hard. i am lost at this point. dose anyone have any sugestions? all info will help Thanks
 
James
#122 of 123
Re: Windstar Transmission [mustangracer09] by apocpg
Oct 24, 2009 (9:23 pm)
Reply

Replying to: mustangracer09 (Oct 24, 2009 7:52 pm)

there is another speed sensor on the driver side. you have to remove the wheel to access it. also have you replaced the range sensor on top of the transmission?
#123 of 123
2003 ford winstar by hotbocho65
Nov 21, 2009 (1:37 pm)
Reply
I was at a red light and my transmision just went dead no revers or foward i had to tow it home. Any one had this problem with there Winstar. Please let me know thank you is there away for me to fix this problem.Thank you

Messages Page 13 of 13
1
...
7
8
9
10
11
12
13
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement