16 messages,
Last post on Mar 06, 2007 at 12:33 AM
You are in the
Ford Fusion/Mercury Milan Forum.
What is this discussion about?
Ford Fusion, Mercury Milan, Automotive News, Sedan
#7 of 16 Re: Shiny, happy Fusions [gogophers1]
by snakeweasel
Sep 30, 2006 (6:22 am)
I wouldn't worry about it. First off the best way to avoid a ticket is not to speed. Secondly just about any car will give LIDAR a good reading. Finally if you have a front plate on your car then it doesn't matter what car you drive.
#11 of 16 Any reports re AWD in snow
by evergreen
Dec 01, 2006 (10:18 pm)
Winter is here so someone must have some experience with the AWD Fusion or Milan driving in snow. Anyone care to share?
#12 of 16 milan owner
by boatnsc
Dec 16, 2006 (8:39 pm)
As far from snow as you can get but l love the Milan.. in Fl. l get 26mpg in city and 31.5 on the road at 80mph with the 4 cyl excellent comfort ,response good suspension .only dislikes are rear brake light hump obscures some view should be in the trunk lid , would love to find a spoiler with lites and convert. also no breakaway mirrors ,not go in the drivein bank line and no handle on the trunk poor design there...but price wise l guess worth a few dislikes Boatnsc
Dec 26, 2006 (8:42 am)
I have a 2006 Milian V6 Premier. Between 45 and 60 mph I have a chattering noise like a speedometer cable problem. No problem before 45 or after 60. There is no cable. Immediately goes way when the throttle is lessened. Any suggestions? My dealer has none????
#14 of 16 Re: Strange noises [fredekirby]
by mschmal
Dec 26, 2006 (9:52 am)
Totally guessing, but could it be a tire noise? The Contis are cheapo tires.
#15 of 16 Re: Strange noises [mschmal]
by fredekirby
Dec 26, 2006 (11:38 am)
Thanks but following auto purchase I purchased most expensive tires om market.
Fred
#16 of 16 Re: Strange noises [fredekirby]
by buckeyepilot
Mar 06, 2007 (12:33 am)
I had a noise that only happened in cold temperatures like that and usually only when the engine was cold with my 06 Fusion. Took it to the dealer and there is a maintenance spec that has to deal with a cable that just needs taped up / secured under the hood on the front driver's side (I think that what they did and where it was). The noise was a slight vibration that happened around 1500-1700 rpm in 3rd to 4th gear.