You are here: Forums Sedans BMW 5-Series BMW 5-Series Transmission Questions

BMW 5-Series Transmission Questions

21 messages,  Last post on Aug 28, 2009 at 5:47 AM

You are in the BMW 5-Series Forum. Your Hosts are pat & karens

What is this discussion about? BMW 5 Series, Transmission, Sedan

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#17 of 21 Re: driveshaft problem [jpayan] by roadburner Jul 27, 2008 (6:36 pm)
Replying to: jpayan (Jul 26, 2008 7:56 pm) The problem most likely was-and is-the center driveshaft bearing, though it wouldn't hurt to inspect the motor and tranny mounts as well.
#18 of 21 reverse lights don't work by mojr Aug 08, 2009 (1:51 pm)
I have a 2002 525i and my reverse lights and signal lights don't work, I already checked all fuses and relays... they're Ok. I wonder if anybody else out there have experienced any similar problems??? The car discharged the battery I already bought a new one, I measured 13.5 Volts at the battery so the charge system is Ok Any ideas would be appreciated especially now in this economy?? I like my car so much and don't want to sell it either. Thanks for your help and have a nice day....
#19 of 21 2006 525i Transmission Fault by larrynguyen Aug 25, 2009 (7:14 pm)
My car (53k miles) just has the red warning light comes on with the message "Gear can be engaged w/o depressing the brake. Drive moderately! Have he system checked by the mechanics..." How serious is this problem? What cause it and what we should do to fix it?   Also, another yellow warning light comes on "Braking/driving stab. Brake and drive control system malfunciton! Reduced braking and driving stability. Avoid hard braking". Any information is really appreciated. Replies to this message: bmw5sin (Aug 26, 2009 8:42 pm) larrynguyen (Aug 28, 2009 5:47 am)
#20 of 21 Re: 2006 525i Transmission Fault [larrynguyen] by bmw5sin Aug 26, 2009 (8:42 pm)
Replying to: larrynguyen (Aug 25, 2009 7:14 pm) hi, i've got the same message "gear can be engaged w/o depressing the brake. Drive moderately" Hv you got your problem solved? I've got the message dignosed and for the result as "electronic pressure control valve 2". Workshops has asked to either overhauled the gearbox, or changed transmission oil and see if it works. One said to change the pressure control valve and transmission oil will do. Automatic gear change is locked now at 2 or 3 shift. There is no lost of power on the gear shift. What shoudl we do from here.......help. Replies to this message: larrynguyen (Aug 28, 2009 5:47 am)
#21 of 21 Re: 2006 525i Transmission Fault [bmw5sin] by larrynguyen Aug 28, 2009 (5:47 am)
Replying to: bmw5sin (Aug 26, 2009 8:42 pm) Unfortunately my car just passed the factory warranty period (4yr/50kmiles) by 1 month (53k miles now). So I need to find out some help to pay for the repair now before I take my car to the dealers yet. The dealer asks for $140 for diagnostic fee which includes using machines to read the error code. Repair cost is based on the diag results. The car still runs ok. The warning lights just come and go. Transmission is ok. Brake still works; probably ABS is disabled. Any one to help?

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans BMW 5-Series BMW 5-Series Transmission Questions