Sign In Join 



Chrysler Town & Country Warning Lights

52 messages,  Last post on Jun 30, 2009 at 8:57 AM

You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens

What is this discussion about? Chrysler Town and Country, Van


Messages Page 5 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion

#33 of 52
Re: Another Check Engine light [dadto3] by kevinsmyth
May 12, 2008 (10:35 am)
Reply

Replying to: dadto3 (Mar 23, 2008 6:38 pm)

One that I know that works is:
1) Fix whatever the problem was that kicked out the error code in the first place.
2) While pressing and HOLDing the "Trip Meter Reset Button" down turn on and off your ignition 5 times. You don't have to start the engine, just turn the ignition key until it get's power the 5 times.
3) You should get a display of 5 dashes (- - - - -) then a display that reads "donE"
4) In my case I had to drive the 2004 Town and Country Van a distance of 2.8 miles before the engine light went off.
NOTE: I kept on starting up the engine after I cleared the code about 10 times expecting the engine light to go off but it never did until I drove the van for a few miles. There must be some combination of engine start ups and driving distance requirements before it'll go out but this combination worked for me.
Good Luck
#34 of 52
Fault codes on 2001 T & C by brad54
Aug 04, 2008 (5:40 pm)
Reply
Could anybody tell me what codes 0442,0455, and 0466 mean? My minivan seems to running fine.
#35 of 52
5 blinks of check engine light by Angryowner08
Nov 24, 2008 (3:52 pm)
Reply
My wife and I own a 96 Town and Country LX with a 3.8 engine. It's front wheel drive. It stalls at Idle and bucks during upshift of its A/T. I did the ignition self diagnostic on-off thing and the Check Engine light blinked 5 times. This P.0.S. blew three transmissions in two week intervals since we got it and it's about "that time" again. Is there a permanant fix or should I tell the dealer we are paying for it to shove it where the sun don't shine? please help! It had no waranty(should have been a red flag) but it looks nice, has no body rust. We feel stupid for buying this that came gift wrapped.
#36 of 52
Re: Check engine light [susan555] by susan555
Nov 24, 2008 (4:26 pm)
Reply

Replying to: susan555 (Apr 23, 2008 7:41 pm)

It is the gas exhaust recirculation sensor.
#37 of 52
Code 1491 by bayview71
Jan 02, 2009 (6:50 pm)
Reply
Have the code 1491 coming up on my 2003 T&C. Could someone help me with what it means? thank you
#38 of 52
05 T&C Oil light??? by fulltrack
Jan 13, 2009 (8:33 am)
Reply
My wife's oil light is staying on... it has oil it in.. there are no rattles or signs of low pressure..... Help... or she drive it until it blows up....
#39 of 52
Re: 05 T&C Oil light??? [fulltrack] by xwesx
Jan 13, 2009 (9:11 am)
Reply

Replying to: fulltrack (Jan 13, 2009 8:33 am)

Hmmm, if it is not low, then my first suspicion would be oil pressure. It might be worthwhile to hook a pressure gauge up to it rather than relying on the dummy light.
#40 of 52
Re: Airbag Warning Light [akmcc] by joepeterson56
Mar 04, 2009 (1:30 pm)
Reply

Replying to: akmcc (Mar 13, 2008 9:05 am)

Possibly the clock spring in the steering column under the wheel. There was a recall on them, but do not know if your year is affected by it. If you call any chrysler dealer or chrysler HQ, give them the last 8 digits of your VIN, they will tell you right away if you need the RECALL REPAIR. Mine is a 2000 and my light came on suddenly, and my horn stopped working. Just took it to a dealer today and had it changed. Picked it up at 4pm and drove home. No more airbag light, and the horn now works. BUT driving home, I turned the wheel while braking, and making a left turn, and the radio died then came back on, but the stations had been wiped out of the memory settings! I am guessing it is a bad connection from something they did, because my model has radio controls on the steering wheel at the back od the air bag & horn cover. Anyone else have this problem or hear about it?
#41 of 52
Re: 05 T&C Oil light??? [xwesx] by joepeterson56
Mar 04, 2009 (1:33 pm)
Reply

Replying to: xwesx (Jan 13, 2009 9:11 am)

Hook up a oil pressure guage(the kind with numbers on it) to it and watch it for a while as you use it to see what the pressure does. It is possible your oil pump is on it's way out! Happened to me, and I learned the hard way.
#42 of 52
error code by brandyc
Mar 12, 2009 (6:08 am)
Reply
I have a 03 Chrysler T&C and I just had my transmission serviced 1 month ago. I have 65,000 miles on it. Last night my check engine light came on and the van would not down shift as I drove. This morning, it seems fine, shifts normally. However, the light is still on. My error code is P1684. Can anyone tell me what this means?
 
Thanks in advance
Brandy

Messages Page 5 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement