Ask the Car People.SM


Chrysler Town & Country Warning Lights

69 messages,  Last post on Mar 29, 2013 at 11:55 PM

You are in the Chrysler Town & Country/Dodge Grand Caravan Forum.

What is this discussion about? Chrysler Town and Country, Van

Messages Page 3 of 8

#14 of 69 Re: 2002 town and country LXI engine light & oil light on [cyount623] by Vipergg

Mar 11, 2007 (5:48 pm)

Replying to: cyount623 (Mar 11, 2007 7:32 am)
Don't attempt to start it again until you figure out why this happened or you will be buying a new engine . of course the first thing would be to check the oil level even though it was just changed . they could have not put enough or any oil in or left the oil plug loose and you lost it all , we have all heard of stranger things happening . Also check the oil filter , they could have left part of the oil filter gasket stuck to the mounting surface and this would cause a leak and you could have lost all the oil . Pull the dipstick and make sure the oil level is between the 2 marks . If its nothing obvious I would have it towed to a Chrysler dealer or mechanic you can trust .

#15 of 69 Things I can check myself - Check Engine light by rorytate

Apr 07, 2007 (7:35 am)

Hi,
I have a 2002 Dodge Grand Caravan and the check engine light is on. Are there any self diagnostics I can do? I did the turn the key on and off and I ended up only with the p1684 code, and nothing else. Any help would be greatly appreciated!
 
Thanks!

#16 of 69 Another Check Engine light by cactusjack578

Apr 28, 2007 (7:56 am)

2003 Chrysler Town and Country 55,000 miles. I have codes
P 0442 and P 0456. Can someone tell me what they mean?
                                               Thanks, Jack

#17 of 69 Re: Another Check Engine light [cactusjack578] by ajarrell

May 05, 2007 (7:54 am)

Replying to: cactusjack578 (Apr 28, 2007 7:56 am)
I also have the code P0456 and need to know what it is and how to clear the check engine light

#18 of 69 Engine/Diagnostic light on after body work by dadto3

Jul 13, 2007 (6:25 am)

I just had some body repair work done to my 2005 T&C. When I picked it up, the engine light is on and it wasn't when I dropped it off. The body repair work was done on the passenger door, so nothing engine related. I'm assuming their work caused the light to come on for some reason. Has anyone had this happen after having body work done? And how did you get it turned off?

#19 of 69 2001 T&C Engine Light came on by cmg3

Aug 01, 2007 (7:29 am)

The light was on for a coupe of days. On day 3, my transmission went (90,500 miles). Transmission replaced, then the compressor went (the next day). that was replaced, car ran good for about 2 weeks, now the ENGINE light is back on again! Please help! Any ideas?

#20 of 69 Re: Another Check Engine light [ajarrell] by orientpch

Aug 23, 2007 (4:45 pm)

Replying to: ajarrell (May 05, 2007 7:54 am)
Hi, the P 0456 code is for a emmission leak... which when I took to the dealer, they said it was because when I put gas in the car I did not tighten the cap down good enough. The next time I put gas, I tighten that cap down as good as it could go and a few days later the engine light came up again. After researching online, it's a typical problem. I am trying to figure out how to reset the light myself along with a couple more problems I have (locks). I wouldn't take it back to the dealer because they were so sh.tty and very questionable. I have since placed a complaint to the company about my last visit to the service dept (they called me for my opinion a fews days after the trip) and am waiting back to see whats happens. I have a 05 Touring with 32,000 miles and I have been having little issues that are just popping up. My warranty just expired 08/11/07... so I'll have to deal with it.

#21 of 69 Check engine light 2004 T&C by bdwzrlizrd

Feb 29, 2008 (10:49 pm)

I got codes of p0403=egr flow circuit malfunction and p0513=immobilizer incorrect are these easy fixes or is something in need of replacing?

#22 of 69 Re: Check engine light 2004 T&C [bdwzrlizrd] by xwesx

Mar 03, 2008 (11:34 am)

Replying to: bdwzrlizrd (Feb 29, 2008 10:49 pm)
There are a number of things that could cause the P403 code in the EGR circuit. The immobilizer issue is likely the more pressing of the two, as that will prevent the engine from running.

#23 of 69 Airbag Warning Light by akmcc

Mar 13, 2008 (10:05 am)

I have a 2004 Chrysler Town & Country. My airbag light comes on a few minutes after I start the car and remains on. It even beeps sometimes. Would anyone have any idea why this light would come on? It's not the light that sits on the middle of the dash that shows when the passengers side airbag is de-activated. It sits near my check engine light.

Messages Page 3 of 8

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement