Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Land Rover Land Rover LR3 Tires and Wheels
171 messages, Last post on Dec 03, 2009 at 7:50 PM
You are in the Land Rover Forum. Your Hosts are steve_ & tidester
|
Replying to: jobie (Oct 01, 2006 1:53 pm) |
|
|
|
|
Replying to: jobie (Oct 01, 2006 1:53 pm) I did - Budds in Oakville, ON just replaced the tires for me a few weeks ago, free of charge. Same issue exactly, noisy Goodyears. I have new Goodyears now/ |
|
|
Replying to: ssp1 (Oct 23, 2006 10:33 pm)  tidester, host
|
|
|
Replying to: tidester (Oct 23, 2006 11:33 pm) What rules do I need to follow to get something like a 16 or 17" steel rim with offroad or winter tires. I don't have the exact spec of the tire sizes with me, but just at a guess - 235/50/R19 would read to me like 235mm wide, side profile is 50% of that, rims size is 19" - so the total diameter would be 19" plus 117.5mm (4.6")for a grand total of 23.6 inches? If I wanted a 17" rim, I would need a side profile of 6.6 inches... or for a 16" rim, a side profile of 7.6 inches? I understand that I need to try and maintain the same outside diameter to keep the speedo and odometer accurate. not sure if a different tire will affect the traction systems / ABS / etc? I could just buy 19" off road tires, but I didn't want to switch tires on and off of the original rims all the time, and wanted to keep the winter/offroad tires on their own rims. If I'm buying new rims, buying a smaller rim and tire is cheaper than buying rubber alone for a 19" tire. Also, you can't deflate a 19" tire very much for offroading... with a 16 or 17" with a wide side profile, I can deflate them lots and get lots of extra grip. Can someone recommend a good tire solution for this? Thanks in advance! /DA
|
|
|
Replying to: dandrews1 (Oct 31, 2006 12:31 pm) 235/50/19 would be 2 times 50 percent times 235 plus 19 this equals 235 mm + 19 inches = 9.25 in + 19 in = 28.25 in That's too small. Factory tire is 255/55/19 = 1.1 times 255 + 19 which is 280.5mm + 19 in = 11.04 in + 19 = 30.04 in You are limited to a minimum wheel size because of your brake rotors. I don't know what the limit is but it may be only 18 inches for an HSE or may be 19. That is the main reason I bought an SE and not an HSE. I don't know if the SE can use 17 inch wheels but I think it can't. You can be pretty certain though that you can't run 16 or 17 inchers on your HSE. |
|
|
|
|
Replying to: lr3maybe (Oct 31, 2006 1:17 pm) You could import a set of 17 inch wheels from europe... Would probably cost a lot of money though. http://www.landrover.com/gb/en/Vehicles/Discovery/Specifications/Discovery_featu- res_and_options.htm |
|
|
Replying to: lr3maybe (Oct 31, 2006 1:17 pm) In either case, it looks like I'm going to have to get dirty to measure the size of the rotor this weekend and see what clearances I have. Followed the link by british_rover and the UK site has some weird acronyms that I'm not familiar with... for the HSE, the rims are stated as: "5 alloy wheels 19 inch ilo 18 inch style 2" I would assume that "ilo" is "in lieu of"? Does anyone know if there is a recommended minimum safe clearance between rotors and rims? Thanks! /DA
|
|
|
Replying to: dandrews1 (Nov 01, 2006 6:11 am) BFGoodrich All Terrain T/A KO (LT285/70R17 121Q) BFGoodrich Krawler T/A KX (37X12.5R17 116) <Side note: how am I supposed to read that tire size?> They both have an "R17" at the end, which tells me they should work on a 17" rim - the KX also comes in a 20" size, but the sidewall is too tall. Also found a Pirelli Scorpion ATR (265/70R17) The outside diameter of these would be 31.6" - compared to the stock 19" rims with tire OD of 30.04 Would that be close enough?
|
|
|
Replying to: dandrews1 (Nov 01, 2006 6:11 am) Sounds right to me. ILO (I live online  )
|
|
|
|
|
Replying to: dandrews1 (Nov 01, 2006 6:50 am) Means a tire with an unladen height of 37 inches and an unladen tread width of 12.5 inches. It is a Flotation tire measurment and is what was used for tires back before the P-Metric measuremnt system was invented. That tire is way too large for the LR3. |
|
You are here:
Forums
SUVs Land Rover Land Rover LR3 Tires and Wheels
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Land Rover LR3
Browse by Board
Browse by Topic
Today's Chats
